Millersburg, Ohio · Wood Window and Door Manufacturing · NAICS 321911
2inspections
3citation items
$16,325current penalties
Oct 17, 2019last inspection
Since 2016, OSHA inspectors have visited Fryburg Door in Ohio 2 times.
The most recent inspection opened on Oct 17, 2019 on a referral, in Millersburg.
In all, OSHA issued 3 citation items: 3 serious.
The proposed penalties came to $23,927; today they stand at $16,325, 32% less.
The rule cited most here is 1910.213 (woodworking machinery), 2 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Fryburg Door averages $8,163 across 2 cited inspections.
Fryburg Door also files yearly injury logs with OSHA, summarized below.
It reported 2 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Ohio · latest 90 days of OSHA records
267employers cited
Get notified the morning OSHA posts each new citation in Ohio: the employer, the site address, the rules broken and the penalty.
Incident on Oct 14, 2019: Employee amputates four fingers on upcut saw
At 6:45 a.m. on October 14, 2019, an employee was operating an Omga FP 4000 upcut saw and was loading two inch by three quarter inch wood material into the saw to cut pieces for building cabinet fronts. The employee's left hand was inadvertently clamped into the saw's point of operation. The saw blade cycled and amputated four fingers on the employee's left hand. The employee was hospitalized to treat the injuries.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2019, the Millersburg site logged 11 recordable injuries or illnesses among about 140 workers: 8.5 per 100 full-time workers, against a median of 3.7 for its industry. Those cases cost 133 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Fryburg Door
Millersburg · 2019
140
11
2
8.5
3.7
Included with any plan: 3 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
On October 14, 2019, an employee was operating an upcut saw. As the employee was loading approximately two inch by three quarter inch wood material into the saw, the employee's left hand was clamped into the saw's point of operation. The saw blade cycled and amputated four fingers. The employee was hospitalized.
On January 27, 2016, an employee was injured when a small shiv of wood kicked back through a straight-line saw and punctured his upper thigh. He was hospitalized.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
(3) Feed rolls shall be guarded by a hood or suitable guard to prevent the hands of the operator from coming in contact with the in-running rolls at any point. The guard shall be fastened to the frame carrying the rolls so as to remain in adjustment for any thickness of stock.
29 CFR 1910.213(r)(4)
(4) The mention of specific machines in paragraphs (a) thru (q) and this paragraph (r) of this section, inclusive, is not intended to exclude other woodworking machines from the requirement that suitable guards and exhaust hoods be provided to reduce to a minimum the hazard due to the point of operation of such machines.
Other wood window and door manufacturing employers in Ohio
Alert subscribers get notified of each newly cited employer in Ohio the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.