OSHA SearchOSHA records by employer

Full Sail Construction: OSHA inspections and violations

Hancock, Maine · Framing Contractors · NAICS 238130

1inspections
4citation items
$3,920current penalties
Mar 10, 2015last inspection

OSHA inspectors have visited Full Sail Construction in Maine one time.

It opened on Mar 10, 2015 as a planned inspection, in Hancock.

In all, OSHA issued 4 citation items: 4 serious.

The proposed penalties came to $5,600; today they stand at $3,920, 30% less.

The rule cited most here is 1926.602 (earthmovers and forklifts in construction), 2 times.

Among construction employers, the typical cited inspection since 2015 ends with a $3,080 penalty. Full Sail Construction averages $3,920 across 1 cited inspection.

Full Sail Construction: OSHA citation items per year, 2015 to 2015
Citation items per year, by inspection date.

Want to know if OSHA cites Full Sail Construction again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 340452978 OPENED MAR 10, 2015Closed

Planned · Complete · Safety · 3 employees at the site · Closed Apr 8, 2015

430 Washington Junction Road, Hancock, ME 04640 · Framing Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1926.502(b)(2) · Fall protection systems
 Serious$2,800$1,960Mar 16, 2015Final
Citation 1, item 1b
29 CFR 1926.502(b)(3) · Fall protection systems
 Serious$0$0Mar 16, 2015Final
Citation 1, item 2a
29 CFR 1926.602(d) · Earthmovers and forklifts in construction
 Serious$2,800$1,960Mar 16, 2015Final
Citation 1, item 2b
29 CFR 1926.602(c)(1)(vi) · Earthmovers and forklifts in construction
 Serious$0$0Mar 16, 2015Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.502 · Fall protection systems

29 CFR 1926.502(b)(2)

(2) Midrails, screens, mesh, intermediate vertical members, or equivalent intermediate structural members shall be installed between the top edge of the guardrail system and the walking/working surface when there is no wall or parapet wall at least 21 inches (53 cm) high.

29 CFR 1926.502(b)(3)

(3) Guardrail systems shall be capable of withstanding, without failure, a force of at least 200 pounds (890 N) applied within 2 inches (5.1 cm) of the top edge, in any outward or downward direction, at any point along the top edge.

29 CFR 1926.602 · Earthmovers and forklifts in construction

29 CFR 1926.602(c)(1)(vi)

(c) Lifting and hauling equipment (other than equipment covered under subpart N of this part). (1) Industrial trucks shall meet the requirements of § 1926.600 and the following:

Other framing contractors employers in Maine

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.