OSHA SearchOSHA records by employer

Gaby's Cafe Corp.: OSHA inspections and violations

Ellenville, New York · Finish Carpentry Contractors · NAICS 238350

1inspections
8citation items
$3,000current penalties
May 28, 2015last inspection

OSHA has inspected Gaby's Cafe Corp. once in New York.

The inspection began on May 28, 2015 as a planned inspection, in Ellenville.

That inspection ended with 8 citation items: 4 serious and 4 other-than-serious.

Penalties were first proposed at $4,800 and now stand at $3,000, 38% lower after settlements or reviews.

Scaffolds, general requirements comes up most often in these citations: 2 items under 1926.451.

How that compares: the median penalty per cited inspection for construction employers since 2015 is $3,080, and Gaby's Cafe Corp. averages $3,000 (1 cited inspection).

Gaby's Cafe Corp.: OSHA citation items per year, 2015 to 2015
Citation items per year, by inspection date.

New York · latest 90 days of OSHA records

353employers cited

Get notified the morning OSHA posts each new citation in New York: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in New York

Checking a subcontractor, a client or your own company? Watch Gaby's Cafe Corp. and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 340661800 OPENED MAY 28, 2015Closed

Planned · Partial · Safety · 7 employees at the site · Closed Oct 24, 2016

141 Canal Street, Ellenville, NY 12428 · Finish Carpentry Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1926.304(f) · Woodworking tools
Serious$1,600$1,000Jul 1, 2015Final
Citation 1, item 1b
29 CFR 1926.304(i)(1) · Woodworking tools
Serious$0$0Jul 1, 2015Final
Citation 1, item 2
29 CFR 1926.451(f)(7) · Scaffolds, general requirements
Serious$1,600$1,200Jul 1, 2015Final
Citation 1, item 3
29 CFR 1926.1053(b)(1) · Ladders in construction
Serious$1,600$800Jul 1, 2015Final
Citation 2, item 1
29 CFR 1926.404(a)(2) · Ground-fault protection on job sites
Other-than-serious$0$0Jul 1, 2015Final
Citation 2, item 2
29 CFR 1926.404(f)(6) · Ground-fault protection on job sites
Other-than-serious$0$0Jul 1, 2015Final
Citation 2, item 3
29 CFR 1926.416(e)(1) · Electrical safety in construction
Other-than-serious$0$0Jul 1, 2015Final
Citation 2, item 4
29 CFR 1926.451(c)(2)(i) · Scaffolds, general requirements
Other-than-serious$0$0Jul 1, 2015Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.1053 · Ladders in construction

29 CFR 1926.1053(b)(1)

(1) When portable ladders are used for access to an upper landing surface, the ladder side rails shall extend at least 3 feet (.9 m) above the upper landing surface to which the ladder is used to gain access; or, when such an extension is not possible because of the ladder's length, then the ladder shall be secured at its top to a rigid support that will not deflect, and a grasping device, such as a grabrail, shall be provided to assist employees in mounting and dismounting the ladder. In no case shall the extension be such that ladder deflection under a load would, by itself, cause the ladder to slip off its support.

29 CFR 1926.304 · Woodworking tools

29 CFR 1926.304(f)

(f) Other requirements. All woodworking tools and machinery shall meet other applicable requirements of American National Standards Institute, 01.1-1961, Safety Code for Woodworking Machinery.

29 CFR 1926.304(i)(1)

(i) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po

29 CFR 1926.404 · Ground-fault protection on job sites

29 CFR 1926.416 · Electrical safety in construction

29 CFR 1926.451 · Scaffolds, general requirements

Other finish carpentry contractors employers in New York

Alert subscribers get notified of each newly cited employer in New York the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.