Gates Corporation: OSHA inspections and violations
Siloam Springs, Arkansas · Rubber and Plastics Hoses and Belting Manufacturing · NAICS 326220
4inspections
6citation items
$37,101current penalties
Nov 6, 2024last inspection
OSHA has inspected Gates Corporation 4 times in Arkansas since 2002.
The latest one began on Nov 6, 2024 on a referral, in Siloam Springs.
Those inspections ended with 6 citation items: 2 serious and 4 other-than-serious.
Penalties were first proposed at $45,594 and now stand at $37,101, 19% lower after settlements or reviews.
Machine guarding comes up most often in these citations: 3 items under 1910.212.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $4,500, and Gates Corporation averages $11,900 (2 cited inspections).
Gates Corporation also files yearly injury logs with OSHA, summarized below.
It reported 4 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Arkansas · latest 90 days of OSHA records
18employers cited
Get notified the morning OSHA posts each new citation in Arkansas: the employer, the site address, the rules broken and the penalty.
OSHA records show Gates Corporation at 12 sites in 8 states. Together they've had 32 inspections and $222,670 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 12 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2021, the Siloam Springs site logged 4 recordable injuries or illnesses among about 683 workers: 0.7 per 100 full-time workers, against a median of 2.9 for its industry. Those cases cost 28 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
The Gates Corporation
Siloam Springs · 2021
683
4
1
0.7
2.9
Gates Corporation
Siloam Springs · 2020
673
4
0
0.6
2.9
Included with any plan: 2 more yearly logs from these sites, back to 2017, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 4 reports on file.
Oct 30, 2024, Siloam Springs: Amputation · amputations involving bone loss · thumb(s)
An employee was cleaning a mandrel shaft with an emery cloth when their glove became caught on the rotating shaft. Their right hand was pulled in with the glove and their thumb was amputated.
On 8/9/2023, an employee was pressure washing a mandrel shell when the pressurized mixture lacerated their right hand near the thumb. The employee was hospitalized.
An employee was changing a mold on a builder. The headstock activated and crushed his left index and middle fingers. The fingers were subsequently amputated.
Sep 22, 2019, Siloam Springs: Hospitalization · second degree heat (thermal) burns · multiple body parts, n.e.c.
A maintenance technician was replacing a hydraulic hose on an extruder. An adjacent hot water hose burst at the connector, spraying him with 200-degree water. He suffered second-degree burns to his right arm, stomach, and right thigh and was hospitalized.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.132 · Personal protective equipment, general requirements
29 CFR 1910.132(d)(2)
(2) The employer shall verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated; the person certifying that the evaluation has been performed; the date(s) of the hazard assessment; and, which identifies the document as a certification of hazard assessment.
(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.
29 CFR 1910.147(c)(5)(i)
(5) Protective materials and hardware. (i) Locks, tags, chains, wedges, key blocks, adapter pins, self-locking fasteners, or other hardware shall be provided by the employer for isolating, securing or blocking of machines or equipment from energy sources.
Alert subscribers get notified of each newly cited employer in Arkansas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.