Gates Corporation: OSHA inspections and violations
Galesburg, Illinois · Rubber and Plastics Hoses and Belting Manufacturing · NAICS 326220
8inspections
4citation items
$30,710current penalties
Feb 22, 2024last inspection
Since 2016, OSHA inspectors have visited Gates Corporation in Illinois 8 times.
The most recent inspection opened on Feb 22, 2024 on a referral, in Galesburg.
In all, OSHA issued 4 citation items: 4 other-than-serious.
The proposed penalties came to $38,544; today they stand at $30,710, 20% less.
The rule cited most here is 1910.212 (machine guarding), 4 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Gates Corporation averages $10,237 across 3 cited inspections.
Gates Corporation also files yearly injury logs with OSHA, summarized below.
It reported 4 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Illinois · latest 90 days of OSHA records
423employers cited
Get notified the morning OSHA posts each new citation in Illinois: the employer, the site address, the rules broken and the penalty.
OSHA records show Gates Corporation at 12 sites in 8 states. Together they've had 32 inspections and $222,670 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 12 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
Incident on Jun 27, 2018: Employee is struck by baler's blade and amputates fingers an
At 9:05 a.m. on June 27, 2018, an employee was cutting sized portions from a block (bale) of polymer with a bench-type bale cutter called the Spadone Cutter. The employee reached into the cutting area of a bench type bale cutter with his left hand and was pulling a block of polymer in order to make the next cut. The employee leaned on the palm actuator button and the machine cycled, amputating his left hands fingers behind the first knuckle and thumb at the distal joint. The employee was hospitalized.
Incident on Jun 4, 2018: Employee is struck by heated rubber and suffers second and t
At 9:00 a.m. on June 4, 2018, an employee transferred the rubber batch to the upper set of rollers and it stretched before breaking apart and falling onto his wrist, left forearm, and hand. The employee suffered with second and third degree burns and was hospitalized.
Incident on Jan 4, 2018: Employee's finger is partially amputated when caught by mach
At 10:18 a.m. on January 4, 2018, an employee was troubleshooting the pneumatic piston of a coiler machine. As the employee pointed at the damaged part, the machine cycled its piston and the employee's right middle finger became caught in the machine. The finger was amputated just below its first joint, which the employee was hospitalized.
No citations from this inspection.
Inspection 341811487 OPENED OCT 3, 2016Closed
Complaint · Partial · Health · 200 employees at the site · Closed Oct 4, 2016
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2019, the Galesburg site logged 4 recordable injuries or illnesses among about 243 workers: 1.7 per 100 full-time workers, against a median of 2.9 for its industry. Those cases cost 92 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Gates
Galesburg · 2019
243
4
3
1.7
2.9
Gates Corporation
Galesburg · 2018
260
8
6
3.4
2.9
Gates Galesburg
Galesburg · 2016
249
12
0
6.1
2.9
Severe injury reports
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 4 reports on file.
Feb 20, 2024, Galesburg: Hospitalization · multiple severe wounds and internal injuries · multiple trunk locations
On February 20, 2024, at approximately 6:30 a.m., an employee was unjamming rubber that had become stuck in a machine. When the machine started, the flapper moved, striking and compressing the employee. The employee was hospitalized for three fractured ribs, a partially collapsed lung, and a puncture wound in the middle of their back.
Jun 27, 2018, Galesburg: Amputation · amputations · hand(s) and finger(s)
An employee was attempting to retrieve a piece of rubber from a guillotine cutting machine when the machine was actuated. The guillotine blade then dropped from its housing and amputated the employee's left hand at its midpoint, severing four fingers and half of the thumb.
Jun 4, 2018, Galesburg: Hospitalization · third or fourth degree heat (thermal) burns · forearm(s)
On June 4, 2018, an employee was operating a mill machine when hot rubber stock would not feed into the rollers correctly. He was attempting to push the rubber stock with his gloved hand when the machine pulled the glove from his hand. A piece of hot rubber then flapped onto his left forearm, causing second and third degree burns. He was hospitalized.
Jan 4, 2018, Galesburg: Hospitalization, amputation · amputations · fingertip(s)
An employee was troubleshooting a coiler machine when a damaged pneumatic piston actuated and amputated the employee's right middle fingertip.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
29 CFR 1910.212(a)(3)(ii)
(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.
Other rubber and plastics hoses and belting manufacturing employers in Illinois
Alert subscribers get notified of each newly cited employer in Illinois the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.