OSHA SearchOSHA records by employer

GE Water & Process Technologies: OSHA inspections and violations

New Philadelphia, Ohio · All Other Miscellaneous Chemical Product and Preparation Manufacturing · NAICS 325998

4inspections
3citation items
$22,816current penalties
Apr 12, 2017last inspection

OSHA has inspected GE Water & Process Technologies 4 times in Ohio since 2009.

The latest one began on Apr 12, 2017 on a referral, in New Philadelphia.

Those inspections ended with 3 citation items: 3 other-than-serious.

Penalties were first proposed at $22,816 and still stand at $22,816.

Lockout/tagout comes up most often in these citations: 3 items under 1910.147.

How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $4,500, and GE Water & Process Technologies averages $22,816 (1 cited inspection).

It reported 1 severe injury to OSHA since 2015.

GE Water & Process Technologies: OSHA citation items per year, 2009 to 2017
Citation items per year, by inspection date.

Ohio · latest 90 days of OSHA records

267employers cited

Get notified the morning OSHA posts each new citation in Ohio: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Ohio

Checking a subcontractor, a client or your own company? Watch GE Water & Process Technologies and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 342246469 OPENED APR 12, 2017Closed

Referral · Partial · Safety · 48 employees at the site · Closed Aug 1, 2017

2118 Reiser Avenue, Se, New Philadelphia, OH 44663 · All Other Miscellaneous Chemical Product and Preparation Manufacturing · OSHA's record · Phone and website on Google Maps

Incident on Apr 5, 2017: Employee amputates fingertip in pinch point created by belt

At approximately 12:00 p.m. on April 5, 2017, Employee #1 was performing a monthly maintenance inspection of the company's main boiler by switching from natural gas fuel to diesel fuel and back again. He had removed the guard that covered a turning belt and pulley. While removing a belt from a belt and pulley and reaching for a tool with the left hand, his right middle finger was caught in the ingoing pinch point, created by the pulley and belt, removing the right middle fingertip below the first knuckle. Employee #1 was transported to a medical center, where he received treatment and was then released. released.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.147(c)(4)(i) · Lockout/tagout
Other-than-serious$11,408$11,408May 23, 2017Final
Citation 1, item 1b Other-than-serious$0$0May 23, 2017Final
Citation 1, item 2
29 CFR 1910.147(d) · Lockout/tagout
Other-than-serious$11,408$11,408May 23, 2017Final

Inspection 340910231 OPENED SEP 9, 2015Closed

Complaint · Partial · Health · 47 employees at the site · Closed Sep 9, 2015

2118 Reiser Ave. Se, New Philadelphia, OH 44663 · All Other Miscellaneous Chemical Product and Preparation Manufacturing · OSHA's record · Phone and website on Google Maps

No citations from this inspection.

Inspection 339982761 OPENED OCT 1, 2014Closed

Complaint · Partial · Health · 49 employees at the site · Closed Oct 1, 2014

2118 Reiser Avenue, Se, New Philadelphia, OH 44663 · All Other Miscellaneous Chemical Product and Preparation Manufacturing · OSHA's record · Phone and website on Google Maps

No citations from this inspection.

Inspection 311842413 OPENED MAY 13, 2009Closed

Planned · Partial · Health · 50 employees at the site · Closed May 13, 2009

2118 Reiser Avenue, Se, New Philadelphia, OH 44663 · All Other Miscellaneous Chemical Product and Preparation Manufacturing · OSHA's record · Phone and website on Google Maps

No citations from this inspection.

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.

Apr 4, 2017, New Philadelphia: Amputation · amputations · finger(s), fingernail(s), n.e.c.

An employee was running a 30-minute boiler test on a diesel fueled boiler and caught the fingers on their right hand in the spinning belt and pulley. The boiler's diesel pump had been turned off but the belt and pulleys were still spinning. The employee's right middle finger was amputated below the first joint. The guard was not in place at the time.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(4)(i)

(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.

29 CFR 1910.147(c)(4)(ii)(b)

(B) Specific procedural steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy;

29 CFR 1910.147(d)

(d) Application of control. The established procedures for the application of energy control (the lockout or tagout procedures) shall cover the following elements and actions and shall be done in the following sequence:

Other all other miscellaneous chemical product and preparation manufacturing employers in Ohio

Alert subscribers get notified of each newly cited employer in Ohio the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.