OSHA SearchOSHA records by employer

Global Environmental Enterprises, LLC: OSHA inspections and violations

Sandersville, Georgia · Nonwoven Fabric Mills · NAICS 313230

1inspections
5citation items
$15,000current penalties
Dec 19, 2019last inspection

Global Environmental Enterprises, LLC has one OSHA inspection on record in Georgia.

OSHA opened it on Dec 19, 2019 on a referral, in Sandersville.

From that inspection OSHA issued 5 citation items: 5 serious.

OSHA proposed $24,627 in penalties. After settlements and reviews the total is $15,000, down 39%.

Most often, OSHA cited 1910.219, belts, pulleys and power-transmission parts (2 items).

For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $4,875. Global Environmental Enterprises, LLC averages $15,000 over 1 cited inspection in that time.

It reported 1 severe injury to OSHA since 2015.

Global Environmental Enterprises, LLC: OSHA citation items per year, 2019 to 2019
Citation items per year, by inspection date.

Georgia · latest 90 days of OSHA records

147employers cited

Get notified the morning OSHA posts each new citation in Georgia: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Georgia

Checking a subcontractor, a client or your own company? Watch Global Environmental Enterprises, LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 344520234 OPENED DEC 19, 2019Closed

Referral · Partial · Safety · 54 employees at the site · Closed Feb 17, 2021

655 East Church Street, Sandersville, GA 31082 · Nonwoven Fabric Mills · OSHA's record · Phone and website on Google Maps

Incident on Dec 15, 2019: Employee sustains amputation of four fingers while clearing

At approximately 7:25 p.m. on December 15, 2019, an employee was operating the 50-inch line. The employee reached into the Beck shear on the line to remove a jam without stopping or locking out the equipment. The employee amputated four fingers on his left hand and was hospitalized to treat these injuries.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.147(c)(7)(i)(a) · Lockout/tagout
Serious$9,446$5,668Feb 4, 2020Final
Citation 1, item 2a
29 CFR 1910.212(a)(1) · Machine guarding
Serious$9,446$5,668Feb 4, 2020Final
Citation 1, item 2b
29 CFR 1910.212(a)(3)(ii) · Machine guarding
Serious$0$0Feb 4, 2020Final
Citation 1, item 3a
29 CFR 1910.219(d)(1) · Belts, pulleys and power-transmission parts
Serious$5,735$3,665Feb 4, 2020Final
Citation 1, item 3b
29 CFR 1910.219(e)(1)(i) · Belts, pulleys and power-transmission parts
Serious$0$0Feb 4, 2020Final

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.

Dec 15, 2019, Sandersville: Hospitalization, amputation · amputations · finger(s), fingernail(s), n.e.c.

An employee was threading a machine when the machine's 50-inch blade amputated four fingers on his left hand.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(7)(i)(a)

(A) Each authorized employee shall receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(1)

(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.

29 CFR 1910.212(a)(3)(ii)

(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.

29 CFR 1910.219 · Belts, pulleys and power-transmission parts

Other nonwoven fabric mills employers in Georgia

Alert subscribers get notified of each newly cited employer in Georgia the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.