OSHA SearchOSHA records by employer

GM Framing Contractor LLC: OSHA inspections and violations

Greensboro, North Carolina · Framing Contractors · NAICS 238130

1inspections
7citation items
$4,950current penalties
Dec 14, 2021last inspection

OSHA inspectors have visited GM Framing Contractor LLC in North Carolina one time.

It opened on Dec 14, 2021 as a planned inspection, in Greensboro.

In all, OSHA issued 7 citation items: 7 serious.

The penalties, $4,950 in total, stand where OSHA first set them.

The rule cited most here is 1926.451 (scaffolds, general requirements), 4 times.

Among construction employers, the typical cited inspection since 2015 ends with a $3,080 penalty. GM Framing Contractor LLC averages $4,950 across 1 cited inspection.

GM Framing Contractor LLC: OSHA citation items per year, 2021 to 2021
Citation items per year, by inspection date.

North Carolina · latest 90 days of OSHA records

234employers cited

51 of them in the same industry

Get notified the morning OSHA posts each new citation in North Carolina: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in North Carolina

Checking a subcontractor, a client or your own company? Watch GM Framing Contractor LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 345690820 OPENED DEC 14, 2021Closed

Planned · Complete · Health · 5 employees at the site · Closed May 28, 2025

1224 Pleasant Ridge Road, Greensboro, NC 27408 · Framing Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.102(a)(1) · Eye and face protection in construction
Serious$900$900Apr 11, 2022Final
Citation 1, item 2a
29 CFR 1926.451(f)(3) · Scaffolds, general requirements
Serious$1,500$1,500Apr 11, 2022Final
Citation 1, item 2b
29 CFR 1926.451(b)(1)(i) · Scaffolds, general requirements
Serious$0$0Apr 11, 2022Final
Citation 1, item 2c
29 CFR 1926.451(b)(2) · Scaffolds, general requirements
Serious$0$0Apr 11, 2022Final
Citation 1, item 2d
29 CFR 1926.451(g)(4)(i) · Scaffolds, general requirements
Serious$0$0Apr 11, 2022Final
Citation 1, item 3
29 CFR 1926.501(b)(13) · Fall protection in construction
Serious$2,100$2,100Apr 11, 2022Final
Citation 1, item 4
29 CFR 1926.1053(b)(13) · Ladders in construction
Serious$450$450Apr 11, 2022Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.102 · Eye and face protection in construction

29 CFR 1926.102(a)(1)

(a) General. (1) The employer shall ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation.

29 CFR 1926.1053 · Ladders in construction

29 CFR 1926.1053(b)(13)

(13) The top or top step of a stepladder shall not be used as a step.

29 CFR 1926.451 · Scaffolds, general requirements

29 CFR 1926.451(b)(1)(i)

(i) Each platform unit (e.g., scaffold plank, fabricated plank, fabricated deck, or fabricated platform) shall be installed so that the space between adjacent units and the space between the platform and the uprights is no more than 1 inch (2.5 cm) wide, except where the employer can demonstrate that a wider space is necessary (for example, to fit around uprights when side brackets are used to extend the width of the platform).

29 CFR 1926.501 · Fall protection in construction

Other framing contractors employers in North Carolina

Alert subscribers get notified of each newly cited employer in North Carolina the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.