OSHA SearchOSHA records by employer

Goff Construction LLC: OSHA inspections and violations

Glendale, Kentucky · Commercial and Institutional Building Construction · NAICS 236220

1inspections
3citation items
$5,000current penalties
May 16, 2018last inspection

OSHA has inspected Goff Construction LLC once in Kentucky.

The inspection began on May 16, 2018 as part of a related case, in Glendale.

That inspection ended with 3 citation items: 3 serious.

Penalties were first proposed at $9,500 and now stand at $5,000, 47% lower after settlements or reviews.

Scaffolds, general requirements comes up most often in these citations: 2 items under 1926.451.

How that compares: the median penalty per cited inspection for construction employers since 2015 is $3,080, and Goff Construction LLC averages $5,000 (1 cited inspection).

Goff Construction LLC: OSHA citation items per year, 2018 to 2018
Citation items per year, by inspection date.

Want to know if OSHA cites Goff Construction LLC again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 343189122 OPENED MAY 16, 2018Closed

Unprogrammed related · Partial · Safety · 3 employees at the site · Closed Apr 8, 2019

651 W. Dixie Ave, Glendale, KY 42701 · Commercial and Institutional Building Construction · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.451(b)(1)(i) · Scaffolds, general requirements
 Serious$3,500$2,000Oct 23, 2018Final
Citation 1, item 2
29 CFR 1926.451(g)(1) · Scaffolds, general requirements
 Serious$3,500$2,000Oct 23, 2018Final
Citation 1, item 3
29 CFR 1926.501(b)(14) · Fall protection in construction
 Serious$2,500$1,000Oct 23, 2018Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.451 · Scaffolds, general requirements

29 CFR 1926.451(b)(1)(i)

(i) Each platform unit (e.g., scaffold plank, fabricated plank, fabricated deck, or fabricated platform) shall be installed so that the space between adjacent units and the space between the platform and the uprights is no more than 1 inch (2.5 cm) wide, except where the employer can demonstrate that a wider space is necessary (for example, to fit around uprights when side brackets are used to extend the width of the platform).

29 CFR 1926.451(g)(1)

(g) Fall protection. (1) Each employee on a scaffold more than 10 feet (3.1 m) above a lower level shall be protected from falling to that lower level. Paragraphs (g)(1) (i) through (vii) of this section establish the types of fall protection to be provided to the employees on each type of scaffold. Paragraph (g)(2) of this section addresses fall protection for scaffold erectors and dismantlers.

29 CFR 1926.501 · Fall protection in construction

29 CFR 1926.501(b)(14)

(14) Wall openings. Each employee working on, at, above, or near wall openings (including those with chutes attached) where the outside bottom edge of the wall opening is 6 feet (1.8 m) or more above lower levels and the inside bottom edge of the wall opening is less than 39 inches (1.0 m) above the walking/working surface, shall be protected from falling by the use of a guardrail system, a safety net system, or a personal fall arrest system.

Other commercial and institutional building construction employers in Kentucky

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.