Grain Millers Inc: OSHA inspections and violations
Saint Ansgar, Iowa · Breakfast Cereal Manufacturing · NAICS 311230
6inspections
22citation items
$17,172current penalties
Sep 12, 2018last inspection
Since 1995, OSHA inspectors have visited Grain Millers Inc in Iowa 6 times.
The most recent inspection opened on Sep 12, 2018 on a referral, in Saint Ansgar.
In all, OSHA issued 22 citation items: 11 serious and 11 other-than-serious.
The proposed penalties came to $22,369; today they stand at $17,172, 23% less.
The rule cited most here is 1910.146 (permit-required confined spaces), 9 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,875 penalty. Grain Millers Inc averages $9,247 across 1 cited inspection.
1 inspection on this page followed a fatal incident.
Grain Millers Inc also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Iowa · latest 90 days of OSHA records
64employers cited
Get notified the morning OSHA posts each new citation in Iowa: the employer, the site address, the rules broken and the penalty.
Incident on Jul 24, 2018: Employee amputates fingers in air lock
At 3:30 p.m. on July 24, 2018, an employee was blending ingredients in the blend room when he noticed the piping had become clogged. At the time of the incident, a new ingredient had recently been introduced that commonly caused clogs. The employee proceeded to shut off the airlock via the computer but inadvertently shutoff the incorrect airlock. He then ascended the caged ladder to access the hatch opening used to unclog piping. The pipe containing the hatch opening had been turned 180 degrees approximately 2 days prior placing the hatch opening in close proximity to the airlock. When the employee reached into the hatch opening, he came into contact with the airlock blades, resulting in amputations of his middle and index fingers on his right hand.
Incident on Jul 19, 2007 (fatal): Employee fell from manlift
On July 19, 2007, Employee #1 was on a manlift belt and was going up instead of down, when she went over the top of the manlift and fell eight stories to her de ath.
Incident on May 17, 2003: Employee amputates fingers when caught in machine
On May 17, 2003, Employee #1 was running the bagger machine when he tripped and his fingers were amputated when they got caught in the carriage. The employee wa s hospitalized for his injuries.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the St. Ansgar site logged 9 recordable injuries or illnesses among about 220 workers: 3.7 per 100 full-time workers, against a median of 2.1 for its industry. Those cases cost 46 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Grain Millers Inc.
St. Ansgar · 2025
220
9
2
3.7
2.1
Included with any plan: 4 more yearly logs from these sites, back to 2021, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(b) Implementation—(1) What do I need to do to complete the OSHA 300 Log? You must enter information about your business at the top of the OSHA 300 Log, enter a one or two line description for each recordable injury or illness, and summarize this information on the OSHA 300-A at the end of the year.
(A) The exposure determination required by paragraph (c)(2),
29 CFR 1910.132 · Personal protective equipment, general requirements
29 CFR 1910.132(d)(2)
(2) The employer shall verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated; the person certifying that the evaluation has been performed; the date(s) of the hazard assessment; and, which identifies the document as a certification of hazard assessment.
Alert subscribers get notified of each newly cited employer in Iowa the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.