OSHA SearchOSHA records by employer

Grand Blanc Processing LLC: OSHA inspections and violations

Holly, Michigan · Metal Heat Treating · NAICS 332811

3inspections
3citation items
$3,000current penalties
Jun 14, 2019last inspection

Since 2007, OSHA inspectors have visited Grand Blanc Processing LLC in Michigan 3 times.

The most recent inspection opened on Jun 14, 2019 on a referral, in Holly.

In all, OSHA issued 3 citation items: 2 serious and 1 other-than-serious.

The proposed penalties came to $6,000; today they stand at $3,000, 50% less.

The rule cited most here is 1910.147 (lockout/tagout), 2 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Grand Blanc Processing LLC averages $3,000 across 1 cited inspection.

Grand Blanc Processing LLC: OSHA citation items per year, 2007 to 2019
Citation items per year, by inspection date.

Want to know if OSHA cites Grand Blanc Processing LLC again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 344066683 OPENED JUN 14, 2019Closed

Referral · Partial · Safety · 68 employees at the site · Closed Aug 19, 2019

10151 Gainey Rd, Holly, MI 48442 · Metal Heat Treating · OSHA's record · Phone and website on Google Maps

Incident on May 3, 2019: Employee amputates finger while tightening sprocket

At 8:45 p.m. on May 3, 2019, an employee was tightening the chain drive sprocket with a wrench on the powered roller table of the upender machine when it turned on unintentionally. The employee's glove was snagged and his finger was caught in the chain at the sprocket. The employee sustained an amputation of the left index finger below the second knuckle but was not hospitalized.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.147(c)(4)(i) · Lockout/tagout
 Serious$3,500$1,750Jul 15, 2019Final
Citation 1, item 1b
29 CFR 1910.147(c)(6)(i) · Lockout/tagout
 Serious$0$0Jul 15, 2019Final
Citation 2, item 1
29 CFR 408.22139(2)
 Other-than-serious$2,500$1,250Jul 15, 2019Final

Inspection 312039993 OPENED MAY 26, 2009Closed

Planned · Complete · Safety · 40 employees at the site · Closed Jun 4, 2009

10151 Gainey Dr, Holly, MI 48442 · Other Fabricated Wire Product Manufacturing · OSHA's record · Phone and website on Google Maps

No citations from this inspection.

Inspection 308831270 OPENED MAY 16, 2007Closed

Planned · No inspection · Safety · Closed May 30, 2007

31550 Stephenson Hwy, Madison Heights, MI 48071 · Metal Heat Treating · OSHA's record · Phone and website on Google Maps

No citations from this inspection.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(4)(i)

(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.

29 CFR 1910.147(c)(6)(i)

(6) Periodic inspection. (i) The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed.

Other metal heat treating employers in Michigan

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.