OSHA SearchOSHA records by employer

Green River Resource Management, Inc.: OSHA inspections and violations

Zirconia, North Carolina · All Other Miscellaneous Wood Product Manufacturing · NAICS 321999

2inspections
5citation items
$3,900current penalties
Oct 15, 2020last inspection

Since 2020, OSHA inspectors have visited Green River Resource Management, Inc. in North Carolina 2 times.

The most recent inspection opened on Oct 15, 2020 on a referral, in Zirconia.

In all, OSHA issued 5 citation items: 5 serious.

The proposed penalties came to $5,200; today they stand at $3,900, 25% less.

The rule cited most here is 1910.219 (belts, pulleys and power-transmission parts), 2 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Green River Resource Management, Inc. averages $3,900 across 1 cited inspection.

Green River Resource Management, Inc.: OSHA citation items per year, 2020 to 2020
Citation items per year, by inspection date.

North Carolina · latest 90 days of OSHA records

234employers cited

3 of them in the same industry

Get notified the morning OSHA posts each new citation in North Carolina: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in North Carolina

Checking a subcontractor, a client or your own company? Watch Green River Resource Management, Inc. and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 344979349 OPENED OCT 15, 2020Closed

Referral · Partial · Health · 9 employees at the site · Closed Nov 5, 2020

195 Blueberry Farm Road, Zirconia, NC 28790 · All Other Miscellaneous Wood Product Manufacturing · OSHA's record · Phone and website on Google Maps

No citations from this inspection.

Inspection 344962428 OPENED OCT 6, 2020Closed

Planned · Partial · Safety · 9 employees at the site · Closed Nov 18, 2021

195 Blueberry Farm Road, Zirconia, NC 28790 · All Other Miscellaneous Wood Product Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.147(c)(1) · Lockout/tagout
Serious$2,100$1,575Oct 15, 2020Final
Citation 1, item 2a
29 CFR 1910.213(h)(1) · Woodworking machinery
Serious$2,100$1,575Oct 15, 2020Final
Citation 1, item 2b
29 CFR 1910.213(h)(4) · Woodworking machinery
Serious$0$0Oct 15, 2020Final
Citation 1, item 3a
29 CFR 1910.219(d)(1) · Belts, pulleys and power-transmission parts
Serious$1,000$750Oct 15, 2020Final
Citation 1, item 3b
29 CFR 1910.219(e)(1)(i) · Belts, pulleys and power-transmission parts
Serious$0$0Oct 15, 2020Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(1)

(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.

29 CFR 1910.213 · Woodworking machinery

29 CFR 1910.213(h)(1)

(h) Radial saws. (1) The upper hood shall completely enclose the upper portion of the blade down to a point that will include the end of the saw arbor. The upper hood shall be constructed in such a manner and of such material that it will protect the operator from flying splinters, broken saw teeth, etc., and will deflect sawdust away from the operator. The sides of the lower exposed portion of the blade shall be guarded to the full diameter of the blade by a device that will automatically adjust itself to the thickness of the stock and remain in contact with stock being cut to give maximum protection possible for the operation being performed.

29 CFR 1910.213(h)(4)

(4) Installation shall be in such a manner that the front end of the unit will be slightly higher than the rear, so as to cause the cutting head to return gently to the starting position when released by the operator.

29 CFR 1910.219 · Belts, pulleys and power-transmission parts

Other all other miscellaneous wood product manufacturing employers in North Carolina

Alert subscribers get notified of each newly cited employer in North Carolina the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.