OSHA SearchOSHA records by employer

H & S Machine Inc.: OSHA inspections and violations

West Valley City, Utah · Machine Shops · NAICS 332710

1inspections
4citation items
$750current penalties
Aug 21, 2019last inspection

OSHA inspectors have visited H & S Machine Inc. in Utah one time.

It opened on Aug 21, 2019 as a planned inspection, in West Valley City.

In all, OSHA issued 4 citation items: 3 serious and 1 other-than-serious.

The proposed penalties came to $1,500; today they stand at $750, 50% less.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. H & S Machine Inc. averages $750 across 1 cited inspection.

H & S Machine Inc.: OSHA citation items per year, 2019 to 2019
Citation items per year, by inspection date.

Utah · latest 90 days of OSHA records

70employers cited

Get notified the morning OSHA posts each new citation in Utah: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Utah

Checking a subcontractor, a client or your own company? Watch H & S Machine Inc. and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 344252762 OPENED AUG 21, 2019Closed

Planned · Partial · Safety · 8 employees at the site · Closed Oct 4, 2019

3403 South 1400 West Building B, West Valley City, UT 84119 · Machine Shops · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.212(a)(1) · Machine guarding
Serious$1,500$750Aug 30, 2019Final
Citation 1, item 1b
29 CFR 1910.213(h)(1) · Woodworking machinery
Serious$0$0Aug 30, 2019Final
Citation 1, item 1c
29 CFR 1910.215(b)(9) · Grinders and abrasive wheels
Serious$0$0Aug 30, 2019Final
Citation 1, item 2
29 CFR 1910.147(c)(1) · Lockout/tagout
Other-than-serious$0$0Aug 30, 2019Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(1)

(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(1)

(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.

29 CFR 1910.213 · Woodworking machinery

29 CFR 1910.213(h)(1)

(h) Radial saws. (1) The upper hood shall completely enclose the upper portion of the blade down to a point that will include the end of the saw arbor. The upper hood shall be constructed in such a manner and of such material that it will protect the operator from flying splinters, broken saw teeth, etc., and will deflect sawdust away from the operator. The sides of the lower exposed portion of the blade shall be guarded to the full diameter of the blade by a device that will automatically adjust itself to the thickness of the stock and remain in contact with stock being cut to give maximum protection possible for the operation being performed.

29 CFR 1910.215 · Grinders and abrasive wheels

Other machine shops employers in Utah

Alert subscribers get notified of each newly cited employer in Utah the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.