OSHA SearchOSHA records by employer

Halal Food Processors: OSHA inspections and violations

Cedar Rapids, Iowa · Rendering and Meat Byproduct Processing · NAICS 311613

1inspections
6citation items
$3,000current penalties
Oct 17, 2016last inspection

OSHA inspectors have visited Halal Food Processors in Iowa one time.

It opened on Oct 17, 2016 after a complaint, in Cedar Rapids.

In all, OSHA issued 6 citation items: 6 serious.

The proposed penalties came to $15,000; today they stand at $3,000, 80% less.

The rule cited most here is 1910.305 (electrical wiring methods), 2 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,875 penalty. Halal Food Processors averages $3,000 across 1 cited inspection.

Halal Food Processors: OSHA citation items per year, 2016 to 2016
Citation items per year, by inspection date.

Iowa · latest 90 days of OSHA records

69employers cited

Get notified the morning OSHA posts each new citation in Iowa: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Iowa

Checking a subcontractor, a client or your own company? Watch Halal Food Processors and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 341861318 OPENED OCT 17, 2016Closed

Complaint · Partial · Safety · 16 employees at the site · Closed Apr 7, 2017

900 66th Ave Sw, Cedar Rapids, IA 52404 · Rendering and Meat Byproduct Processing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.147(c)(1) · Lockout/tagout
Serious$2,500$500Jan 25, 2017Final
Citation 1, item 2
29 CFR 1910.212(a)(1) · Machine guarding
Serious$2,500$500Jan 25, 2017Final
Citation 1, item 3
29 CFR 1910.215(b)(9) · Grinders and abrasive wheels
Serious$2,500$500Jan 25, 2017Final
Citation 1, item 4
29 CFR 1910.219(c)(4)(i) · Belts, pulleys and power-transmission parts
Serious$2,500$500Jan 25, 2017Final
Citation 1, item 5
29 CFR 1910.305(b)(1)(ii) · Electrical wiring methods
Serious$2,500$500Jan 25, 2017Final
Citation 1, item 6
29 CFR 1910.305(g)(1)(iv)(a) · Electrical wiring methods
Serious$2,500$500Jan 25, 2017Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(1)

(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(1)

(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.

29 CFR 1910.215 · Grinders and abrasive wheels

29 CFR 1910.215(b)(9)

(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)

29 CFR 1910.219 · Belts, pulleys and power-transmission parts

29 CFR 1910.305 · Electrical wiring methods

Other rendering and meat byproduct processing employers in Iowa

Alert subscribers get notified of each newly cited employer in Iowa the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.