OSHA SearchOSHA records by employer

Height Precision Construction Inc.,: OSHA inspections and violations

Stowe, Vermont · Framing Contractors · NAICS 238130

1inspections
3citation items
$3,528current penalties
Apr 1, 2026last inspection

OSHA inspectors have visited Height Precision Construction Inc., in Vermont one time.

It opened on Apr 1, 2026 on a referral, in Stowe and is still open.

In all, OSHA issued 3 citation items: 3 serious.

The proposed penalties came to $5,427; today they stand at $3,528, 35% less.

Among construction employers, the typical cited inspection since 2015 ends with a $3,079 penalty. Height Precision Construction Inc., averages $3,528 across 1 cited inspection.

Height Precision Construction Inc.,: OSHA citation items per year, 2026 to 2026
Citation items per year, by inspection date.

Want to know if OSHA cites Height Precision Construction Inc., again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 348847823 OPENED APR 1, 2026Open

Referral · Partial · Safety · 6 employees at the site · Open

Salvas Ln Lot 7, Stowe, VT 05672 · Framing Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.304(i)(1) · Woodworking tools
 Serious$2,412$1,568May 14, 2026Final
Citation 1, item 2a
29 CFR 1926.501(b)(1) · Fall protection in construction
 Serious$3,015$1,960May 14, 2026Final
Citation 1, item 2b
29 CFR 1926.503(a)(1) · Fall protection training in construction
 Serious$0$0May 14, 2026Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.304 · Woodworking tools

29 CFR 1926.304(i)(1)

(i) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po

29 CFR 1926.501 · Fall protection in construction

29 CFR 1926.501(b)(1)

(b)(1) Unprotected sides and edges. Each employee on a walking/working surface (horizontal and vertical surface) with an unprotected side or edge which is 6 feet (1.8 m) or more above a lower level shall be protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems.

29 CFR 1926.503 · Fall protection training in construction

29 CFR 1926.503(a)(1)

(a) Training program. (1) The employer shall provide a training program for each employee who might be exposed to fall hazards. The program shall enable each employee to recognize the hazards of falling and shall train each employee in the procedures to be followed in order to minimize these hazards.

Other framing contractors employers in Vermont

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.