OSHA SearchOSHA records by employer

Henry's Carpentry, LLC: OSHA inspections and violations

New Canaan, Connecticut · Framing Contractors · NAICS 238130

2inspections
7citation items
$5,320current penalties
Sep 22, 2017last inspection

Since 2014, OSHA inspectors have visited Henry's Carpentry, LLC in Connecticut 2 times.

The most recent inspection opened on Sep 22, 2017 as a planned inspection, in Oxford.

In all, OSHA issued 7 citation items: 6 serious and 1 other-than-serious.

The proposed penalties came to $7,600; today they stand at $5,320, 30% less.

The rule cited most here is 1926.451 (scaffolds, general requirements), 3 times.

Among construction employers, the typical cited inspection since 2015 ends with a $3,080 penalty. Henry's Carpentry, LLC averages $0 across 1 cited inspection.

Henry's Carpentry, LLC: OSHA citation items per year, 2014 to 2017
Citation items per year, by inspection date.

Connecticut · latest 90 days of OSHA records

85employers cited

3 of them in the same industry

Get notified the morning OSHA posts each new citation in Connecticut: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Connecticut

Checking a subcontractor, a client or your own company? Watch Henry's Carpentry, LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 342655172 OPENED SEP 22, 2017Closed

Planned · Partial · Safety · 6 employees at the site · Closed Feb 16, 2018

278 Oxford Road, Oxford, CT 06478 · Framing Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.1053(b)(1) · Ladders in construction
Other-than-serious$0$0Dec 21, 2017Final

Inspection 339845687 OPENED JUL 10, 2014Closed

Planned · Partial · Safety · 3 employees at the site · Closed Oct 5, 2017

59 Farity Drive, New Canaan, CT 06840 · Framing Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1926.102(a)(1) · Eye and face protection in construction
Serious$1,600$1,120Sep 26, 2014Final
Citation 1, item 1b
29 CFR 1926.302(e)(1) · Power-operated hand tools
Serious$0$0Sep 26, 2014Final
Citation 1, item 2
29 CFR 1926.451(e)(8) · Scaffolds, general requirements
Serious$2,000$1,400Sep 26, 2014Final
Citation 1, item 3
29 CFR 1926.451(f)(7) · Scaffolds, general requirements
Serious$1,200$840Sep 26, 2014Final
Citation 1, item 4a
29 CFR 1926.451(g)(1)(vii) · Scaffolds, general requirements
Serious$2,800$1,960Sep 26, 2014Final
Citation 1, item 4b
29 CFR 1926.454(a) · Scaffold training
Serious$0$0Sep 26, 2014Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.102 · Eye and face protection in construction

29 CFR 1926.102(a)(1)

(a) General. (1) The employer shall ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation.

29 CFR 1926.1053 · Ladders in construction

29 CFR 1926.1053(b)(1)

(1) When portable ladders are used for access to an upper landing surface, the ladder side rails shall extend at least 3 feet (.9 m) above the upper landing surface to which the ladder is used to gain access; or, when such an extension is not possible because of the ladder's length, then the ladder shall be secured at its top to a rigid support that will not deflect, and a grasping device, such as a grabrail, shall be provided to assist employees in mounting and dismounting the ladder. In no case shall the extension be such that ladder deflection under a load would, by itself, cause the ladder to slip off its support.

29 CFR 1926.302 · Power-operated hand tools

29 CFR 1926.302(e)(1)

(e) Powder-actuated tools. (1) Only employees who have been trained in the operation of the particular tool in use shall be allowed to operate a powder-actuated tool.

29 CFR 1926.451 · Scaffolds, general requirements

29 CFR 1926.454 · Scaffold training

Other framing contractors employers in Connecticut

Alert subscribers get notified of each newly cited employer in Connecticut the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.