Wichita, Kansas · Other Aircraft Parts and Auxiliary Equipment Manufacturing · NAICS 336413
1inspections
3citation items
$11,704current penalties
Jan 7, 2021last inspection
OSHA inspectors have visited Heroux Devtek in Kansas one time.
It opened on Jan 7, 2021 on a referral, in Wichita.
In all, OSHA issued 3 citation items: 3 serious.
The proposed penalties came to $19,506; today they stand at $11,704, 40% less.
The rule cited most here is 1910.219 (belts, pulleys and power-transmission parts), 2 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Heroux Devtek averages $11,704 across 1 cited inspection.
Citation items per year, by inspection date.
Kansas · latest 90 days of OSHA records
48employers cited
Get notified the morning OSHA posts each new citation in Kansas: the employer, the site address, the rules broken and the penalty.
OSHA records show Heroux Devtek at 2 sites in 2 states. Together they've had 2 inspections and $12,504 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 2 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
Incident on Dec 22, 2020: Employee suffers fingertip amputation while operating saw
At 10:15 a.m. on December 22, 2020, Employee #1 was operating a saw while wearing gloves. While working, the employee inadvertently brought his hand into proximity of the moving saw blade, which made contact with the glove and resulted in the amputation of the tip of his finger. Emergency services were called, and the employee was treated without hospitalization.
(a) General requirements—(1) Machine guarding. Abrasive wheels shall be used only on machines provided with safety guards as defined in the following paragraphs of this section, except:
29 CFR 1910.219 · Belts, pulleys and power-transmission parts
29 CFR 1910.219(d)(1)
(d) Pulleys—(1) Guarding. Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section. Pulleys serving as balance wheels (e.g., punch presses) on which the point of contact between belt and pulley is more than six feet six inches (6 ft. 6 in.) from the floor or platform may be guarded with a disk covering the spokes.
29 CFR 1910.219(e)(1)(i)
(e) Belt, rope, and chain drives—(1) Horizontal belts and ropes. (i) Where both runs of horizontal belts are seven (7) feet or less from the floor level, the guard shall extend to at least fifteen (15) inches above the belt or to a standard height except that where both runs of a horizontal belt are 42 inches or less from the floor, the belt shall be fully enclosed in accordance with paragraphs (m) and (o) of this section.
Other other aircraft parts and auxiliary equipment manufacturing employers in Kansas
Alert subscribers get notified of each newly cited employer in Kansas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.