Since 2014, OSHA inspectors have visited Hill Air Force Base, Complex Safety in Utah 6 times.
The most recent inspection opened on Jun 2, 2016 on a referral, in Hill Air Force Base.
In all, OSHA issued 8 citation items: 4 serious and 4 repeat.
No penalty came with these citations.
The rule cited most here is 1910.132 (personal protective equipment, general requirements), 2 times.
Among public administration employers, the typical cited inspection since 2015 ends with a $0 penalty. Hill Air Force Base, Complex Safety averages $0 across 1 cited inspection.
It reported 3 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Utah · latest 90 days of OSHA records
70employers cited
Get notified the morning OSHA posts each new citation in Utah: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Hill Air Force Base, Complex Safety and get notified the morning OSHA posts a new citation for it.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 3 reports on file.
Mar 29, 2017, Hill Air Force Base: Amputation · amputations · finger(s), fingernail(s), unspecified
An employee was lowering a box of clay pigeons into a container when the container lid fell on his left middle finger, resulting in an amputation without bone loss.
May 24, 2016, Hill Air Force Base: Hospitalization · cuts, lacerations · abdomen, except internal location of diseases or disorders
An employee was helping to troubleshoot hydro-blast equipment. The hydro-blast operator lost control of the equipment and hit the employee with high-pressure water. He sustained lacerations to his hand and abdomen, as well as an abdomen injury that required surgery.
Feb 25, 2016, Hill Air Force Base: Amputation · amputations · fingertip(s)
An employee amputated the left middle fingertip while operating a hand held router.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(c) Permissible exposure limit (PEL). The employer shall ensure that no employee is exposed to an airborne concentration of chromium (VI) in excess of 5 micrograms per cubic meter of air (5 µgm/m 3), calculated as an 8-hour time-weighted average (TWA).
29 CFR 1910.1026(f)(1)(i)
(f) Methods of compliance—(1) Engineering and work practice controls. (i) Except as permitted in paragraph (f)(1)(ii) and paragraph (f)(1)(iii) of this section, the employer shall use engineering and work practice controls to reduce and maintain employee exposure to chromium (VI) to or below the PEL unless the employer can demonstrate that such controls are not feasible. Wherever feasible engineering and work practice controls are not sufficient to reduce employee exposure to or below the PEL, the employer shall use them to reduce employee exposure to the lowest levels achievable, and shall supplement them by the use of respiratory protection that complies with the requirements of paragraph (g) of this section.
(c) Permissible Exposure Limit (PEL). The employer shall assure that no employee is exposed to an airborne concentration of cadmium in excess of five micrograms per cubic meter of air (5 µg/m 3), calculated as an eight-hour time-weighted average exposure (TWA).
29 CFR 1910.132 · Personal protective equipment, general requirements
Alert subscribers get notified of each newly cited employer in Utah the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.