Hma Contracting Corp: OSHA inspections and violations
Oneonta, New York · Highway, Street, and Bridge Construction · NAICS 237310
4inspections
3citation items
$19,861current penalties
Oct 1, 2025last inspection
Hma Contracting Corp has 4 OSHA inspections on record in New York, the first in 2005.
OSHA's last visit started on Oct 1, 2025 after a fatality or catastrophe, in Saratoga Springs, and the case has not closed yet.
Across those inspections OSHA issued 3 citation items: 1 serious and 2 other-than-serious.
OSHA proposed $31,446 in penalties. After settlements and reviews the total is $19,861, down 37%.
Most often, OSHA cited 1910.147, lockout/tagout (2 items).
For context, across all construction employers the median penalty per cited inspection since 2015 is $3,080. Hma Contracting Corp averages $9,930 over 2 cited inspections in that time.
Hma Contracting Corp also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
New York · latest 90 days of OSHA records
353employers cited
22 of them in the same industry
Get notified the morning OSHA posts each new citation in New York: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2018, the Schaghticoke site logged 0 recordable injuries or illnesses among about 26 workers: 0.0 per 100 full-time workers, against a median of 2.2 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
HMA Contracting Corp.
Schaghticoke · 2018
26
0
0
0.0
2.2
Included with any plan: 2 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.
Dec 6, 2024, Schaghticoke: Amputation · amputations involving bone loss · other finger(s) n.e.c.
An employee was fixing a bracket and piston on a trailer that was attached to a truck. The employee was holding a hydraulic cylinder, trying to get it to reach the bracket on the trailer but it was approximately 3/4" short. The employee used the hydraulic lever on the side of the trailer to raise the cylinder the needed distance and the cylinder caught their left middle finger between the trailer…
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.
29 CFR 1910.147(c)(7)(i)
(7) Training and communication. (i) The employer shall provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees. The training shall include the following:
(2) The design and use of all traffic control devices, including signs, signals, markings, barricades, and other devices, for protection of construction workers shall conform to Part 6 of the MUTCD (incorporated by reference, see § 1926.6).
Other highway, street, and bridge construction employers in New York
Alert subscribers get notified of each newly cited employer in New York the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.