OSHA SearchOSHA records by employer

Holstein Manufacturing: OSHA inspections and violations

Holstein, Iowa · Fabricated Structural Metal Manufacturing · NAICS 332312

1inspections
6citation items
$6,000current penalties
Jun 30, 2023last inspection

OSHA inspectors have visited Holstein Manufacturing in Iowa one time.

It opened on Jun 30, 2023 on a referral, in Holstein.

In all, OSHA issued 6 citation items: 6 serious.

The proposed penalties came to $8,080; today they stand at $6,000, 26% less.

The rule cited most here is 1910.219 (belts, pulleys and power-transmission parts), 5 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Holstein Manufacturing averages $6,000 across 1 cited inspection.

Holstein Manufacturing: OSHA citation items per year, 2023 to 2023
Citation items per year, by inspection date.

Iowa · latest 90 days of OSHA records

69employers cited

Get notified the morning OSHA posts each new citation in Iowa: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Iowa

Checking a subcontractor, a client or your own company? Watch Holstein Manufacturing and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 346808678 OPENED JUN 30, 2023Closed

Referral · Partial · Safety · 17 employees at the site · Closed Apr 3, 2024

5368 110th Street, Holstein, IA 51025 · Fabricated Structural Metal Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.212(a)(3)(ii) · Machine guarding
Serious$3,108$2,500Oct 13, 2023Final
Citation 1, item 2a
29 CFR 1910.219(c)(2) · Belts, pulleys and power-transmission parts
Serious$2,486$1,750Oct 13, 2023Final
Citation 1, item 2b
29 CFR 1910.219(c)(4)(i) · Belts, pulleys and power-transmission parts
Serious$0$0Oct 13, 2023Final
Citation 1, item 2c
29 CFR 1910.219(f)(1)(i) · Belts, pulleys and power-transmission parts
Serious$0$0Oct 13, 2023Final
Citation 1, item 3a
29 CFR 1910.219(d)(1) · Belts, pulleys and power-transmission parts
Serious$2,486$1,750Oct 13, 2023Final
Citation 1, item 3b
29 CFR 1910.219(e)(3)(i) · Belts, pulleys and power-transmission parts
Serious$0$0Oct 13, 2023Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(3)(ii)

(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.

29 CFR 1910.219 · Belts, pulleys and power-transmission parts

29 CFR 1910.219(c)(4)(i)

(4) Projecting shaft ends. (i) Projecting shaft ends shall present a smooth edge and end and shall not project more than one-half the diameter of the shaft unless guarded by nonrotating caps or safety sleeves.

29 CFR 1910.219(d)(1)

(d) Pulleys—(1) Guarding. Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section. Pulleys serving as balance wheels (e.g., punch presses) on which the point of contact between belt and pulley is more than six feet six inches (6 ft. 6 in.) from the floor or platform may be guarded with a disk covering the spokes.

Other fabricated structural metal manufacturing employers in Iowa

Alert subscribers get notified of each newly cited employer in Iowa the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.