Holtec International: OSHA inspections and violations
Camden, New Jersey · Metal Tank (Heavy Gauge) Manufacturing · NAICS 332420
1inspections
2citation items
$26,520current penalties
Nov 6, 2018last inspection
Holtec International has one OSHA inspection on record in New Jersey.
OSHA opened it on Nov 6, 2018 on a referral, in Camden.
From that inspection OSHA issued 2 citation items: 2 other-than-serious.
OSHA proposed $26,520 in penalties and the amount has not been reduced.
Most often, OSHA cited 1910.244, other portable tools and equipment (2 items).
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $3,600. Holtec International averages $26,520 over 1 cited inspection in that time.
Holtec International also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
New Jersey · latest 90 days of OSHA records
270employers cited
Get notified the morning OSHA posts each new citation in New Jersey: the employer, the site address, the rules broken and the penalty.
OSHA records show Holtec International at 2 sites in 2 states. Together they've had 7 inspections and $48,270 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 2 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
Incident on Oct 26, 2018: Employee sustains contusion when struck by metal tube
At 7:45 p.m on October 26, 2018, an employee was assisting a coworker with getting the correct tolerance for a HI-STORM inner shell with a portable hydraulic pump press and was hit in the chest by a metal tube. The employee sustained a contusion and was hospitalized.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Camden site logged 9 recordable injuries or illnesses among about 200 workers: 4.5 per 100 full-time workers, against a median of 2.8 for its industry. Those cases cost 170 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Holtec International
Camden · 2025
200
9
1
4.5
2.8
Advanced Manufacturing Division
Camden · 2023
160
3
1
1.6
2.8
Included with any plan: 5 more yearly logs from these sites, back to 2019, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.
Oct 25, 2018, Camden: Hospitalization · fractures · chest, except internal location of diseases or disorders
An employee was on a platform, manipulating the inner diameter of a vessel with a hydraulic press using quarter-inch square steel tubing. The tubing became free and knocked the employee off the platform and onto the floor. The employee suffered injuries including contusions, lacerations, and broken ribs. The employee was hospitalized.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(a) Jacks—(1) Loading and marking. (i) The operator shall make sure that the jack used has a rating sufficient to lift and sustain the load.
29 CFR 1910.244(a)(2)(i)
(2) Operation and maintenance. (i) In the absence of a firm foundation, the base of the jack shall be blocked. If there is a possibility of slippage of the cap, a block shall be placed in between the cap and the load.
Other metal tank (heavy gauge) manufacturing employers in New Jersey
Alert subscribers get notified of each newly cited employer in New Jersey the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.