Horsehead Corporation: OSHA inspections and violations
Chicago, Illinois · Nonferrous Metal (except Aluminum) Smelting and Refining · NAICS 331410
1inspections
2citation items
$12,000current penalties
Jun 15, 2015last inspection
OSHA inspectors have visited Horsehead Corporation in Illinois one time.
It opened on Jun 15, 2015 after a fatality or catastrophe, in Chicago.
In all, OSHA issued 2 citation items: 2 serious.
The proposed penalties came to $14,000; today they stand at $12,000, 14% less.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Horsehead Corporation averages $12,000 across 1 cited inspection.
1 inspection on this page followed a fatal incident.
Horsehead Corporation also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Illinois · latest 90 days of OSHA records
428employers cited
Get notified the morning OSHA posts each new citation in Illinois: the employer, the site address, the rules broken and the penalty.
OSHA records show Horsehead Corporation at 3 sites in 2 states. Together they've had 55 inspections and $962,188 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 3 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
Incident on Jun 15, 2015 (fatal): Employee falls in silo and is killed
At 12:00 p.m. on June 15, 2015, Employee #1, a utility laborer, was working alone on the fifth level of the C and D building. Employee #1's job was to ensure that conveyor belts carrying electric arc furnace (EAF) dust were continuously running and maintained as unclogged. The utility laborers shovel and air lance the rollers under the conveyor belt to keep the belt from clogging, allowing the belt to keep EAF dust moving into one of four silos and to redirect the flow as needed so that the silos never overflow. At the end of the conveyor belt there is a nine inch lip off the floor which has an opening that leads into Silo Number 4. The opening is 37.25 inches in length and 15.5 inches in width. The utility laborers do have to stand near the opening to take measurements of the EAF dust inside the silo to determine if they should redirect the EAF dust into another silo to prevent overfilling. There are no other openings or access points to Silo Number4 from the fifth level of the C and D building. At one point, Employee #1 fell through the opening into Silo Number 4 which was partially filled with EAF dust material. A crane operator, a coworker, unable to feed material onto the conveyor belts which had stopped, attempted to contact Employee #1 by radio. When Employee #1 could not be reached by radio, the coworker and superintendent went to the fifth level of the C and D building and found Employee #1 in Silo Number 4 when they looked through the opening. The local fire department was contacted. Maintenance workers used a reciprocating saw to cut the bottom of Silo Number 4 to gain access. Fire department personnel retrieved Employee #1 out of Silo Number 4 without entering the silo. Employee #1 was transferred to the hospital where he was pronounced dead. Employee #1 was killed from asphyxiation/suffocation due to aspiration of foreign material.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2017, the Chicago site logged 4 recordable injuries or illnesses among about 65 workers: 5.3 per 100 full-time workers, against a median of 2.9 for its industry. Those cases cost 1 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Calumet
Chicago · 2017
65
4
1
5.3
2.9
Included with any plan: 1 more yearly log from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
Alert subscribers get notified of each newly cited employer in Illinois the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.