OSHA has inspected Hughes Network Systems, LLC 2 times in Maryland since 1994.
The latest one began on Apr 16, 2021 after an accident, in Gaithersburg.
Those inspections ended with 7 citation items: 5 serious and 2 other-than-serious.
Penalties were first proposed at $5,037 and now stand at $2,980, 41% lower after settlements or reviews.
Woodworking machinery comes up most often in these citations: 3 items under 1910.213.
How that compares: the median penalty per cited inspection for professional services employers since 2015 is $1,822, and Hughes Network Systems, LLC averages $2,980 (1 cited inspection).
Hughes Network Systems, LLC also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Maryland · latest 90 days of OSHA records
194employers cited
Get notified the morning OSHA posts each new citation in Maryland: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Hughes Network Systems, LLC and get notified the morning OSHA posts a new citation for it.
Incident on Apr 15, 2021: Board being cut kicks back into employee's finger and causes
At 7:47 a.m. on April 15, 2021, a 70-year-old employee was working for a firm that provided broadband network services. He was working at a manufacturing facility in a suburban industrial park. He was a senior maintenance specialist. He was in the maintenance shop, when another employee came in and requested that a piece of oak plywood be cut. The plywood was 28 in. by 24 in. (711-mm by 610-mm) and 0.5 in. thick (13 mm thick). The employee was cutting it down to 8 in. by 24 in. (203 mm by 610 mm). He was operating a 10-in. (254-mm) Delta Unisaw tilting arbor saw that ran at approximately 3450 rpm to cut the plywood. He was not using a hood, spreader, anti-kickback devices, or an engineering control such as a push stick to push the piece of plywood into the blade. He was wearing his prescribed lens eyeglasses and not impact-resistant eye protection. He had just made a straight 8-in. (200 mm) cut off the left side of the wood and was bending down to turn off the saw, when the right side of the board contacted the rotating blade and kicked back. The wood hit the employee's left ring finger. Upon seeing blood, the employee grabbed a cloth to wrap around his finger and requested that a coworker take him to the hospital. The hospital administered first aid. An x-ray found a broken bone in the ring finger. Given a choice of going home or staying overnight in case the pain levels increased, the employee opted to stay overnight. He was released from the hospital at around 11:00 a.m. the following morning, Friday, April 16, 2021. He went back for scheduled surgery that afternoon. He had suffered a broken bone, a laceration, and ligament damage to his ring finger.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Gaithersburg site logged 1 recordable injury or illness among about 280 workers: 0.4 per 100 full-time workers, against a median of 0.1 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Hughes Network Systems
Gaithersburg · 2025
280
1
0
0.4
0.1
Hughes Network Systems - Lakeforest (LFF)
Gaithersburg · 2023
413
0
0
0.0
0.1
Hughes Network Systems - Manufacturing
Gaithersburg · 2023
298
2
2
0.7
0.0
Included with any plan: 14 more yearly logs from these sites, back to 2017, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(a) General requirements. (1) The employer shall ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation.
(c) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po
29 CFR 1910.213(c)(2)
(2) Each hand-fed circular ripsaw shall be furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator. The spreader shall be made of hard tempered steel, or its equivalent, and shall be thinner than the saw kerf. It shall be of sufficient width to provide adequate stiffness or rigidity to resist any reasonable side thrust or blow tending to bend or throw it out of position. The spreader shall be attached so that it will remain in true alignment with the saw even when either the saw or table is tilted. The provision of a spreader in connection with grooving, dadoing, or rabbeting is not required. On the completion of such operations, the spreader shall be immediately replaced.
29 CFR 1910.303 · Electrical equipment, general requirements
Alert subscribers get notified of each newly cited employer in Maryland the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.