Hunter Industries Incorporated: OSHA inspections and violations
San Marcos, California · Other Metal Valve and Pipe Fitting Manufacturing · NAICS 332919
8inspections
14citation items
$51,645current penalties
Mar 13, 2025last inspection
Hunter Industries Incorporated has 8 OSHA inspections on record in California, the first in 1973.
OSHA's last visit started on Mar 13, 2025 after an accident, in San Marcos, and the case has not closed yet.
Across those inspections OSHA issued 14 citation items: 3 serious and 11 other-than-serious.
OSHA proposed $51,645 in penalties and the amount has not been reduced.
Most often, OSHA cited 1910.213, woodworking machinery (2 items).
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $3,600. Hunter Industries Incorporated averages $16,978 over 3 cited inspections in that time.
Hunter Industries Incorporated also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
California · latest 90 days of OSHA records
1,130employers cited
Get notified the morning OSHA posts each new citation in California: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Hunter Industries Incorporated and get notified the morning OSHA posts a new citation for it.
Incident on Mar 22, 2017: Employee amputates fingertip when caught between the frame a
At 10:00 a.m. on March 22, 2017, Employee #1 was operating an 11 year old Orion L66-95 pallet wrapper, applying plastic wrap to a pallet full of boxes. The pallet was placed on a turntable that rotates clockwise while a roll of plastic wrap is automatically raised by an automated arm with a pre-set number of turns, until the stacked pallet is wrapped. After initiating the pallet wrapping turntable to spin, the employee tried to tuck the plastic into the spinning pallet. Her finger was pulled into the unguarded running point between the metal frame and the turntable, resulting in a fingertip amputation. amputation.
Incident on Jul 18, 2001: Employee finger amputated by plastics molding machine
At 4:45 p.m. on July 18, 2001, Employee #1 of Hunter Industries Inc., in San Mar cos, California, was preparing a mold on Machine Number 322 and was in the proce ss of setting the machine up for production. He encountered some technical diffi culty and wanted to see where the machine was catching. When Employee #1 decided to enter the machine, rather than following safety protocol, he chose to enter the interior of the machine through a protective guard that he himself removed. Employee #1 was well experienced with working with mold machines. He has twelve years of experience with his employer and was recently promoted to a position of technical and production control. Employee #1 was aware that he was violating a n established safety protocol for the task he was involved in. He admits to taki ng a short cut and feeling over confidant and wanted to save some time so that h e could go home at five o'clock. Employee #1 caught his right hand in the plasti cs molding machine, resulting in a fractured right thumb and middle finger, and the amputation of his right index finger. A fellow employee transported Employee #1 to Palomar Medical Center where he was hospitalized.
No citations from this inspection.
Inspection 126017854 OPENED MAR 4, 2001Closed
Accident · Partial · Safety · 200 employees at the site · Closed Jun 15, 2001
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the San Marcos site logged 22 recordable injuries or illnesses among about 1,024 workers: 2.3 per 100 full-time workers, against a median of 2.6 for its industry. Those cases cost 970 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Hunter Industries
San Marcos · 2025
1,024
22
17
2.3
2.6
Included with any plan: 8 more yearly logs from these sites, back to 2017, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(a) Scope and application. The requirements of this section apply to the placement, use, maintenance, and testing of portable fire extinguishers provided for the use of employees. Paragraph (d) of this section does not apply to extinguishers provided for employee use on the outside of workplace buildings or structures. Where extinguishers are provided but are not intended for employee use and the employer has an emergency action plan and a fire prevention plan that meet the requirements of 29 CFR 1910.38 and 29 CFR 1910.39 respectively, then only the requirements of paragraphs (e) and (f) of this section apply.
(d) Hand-fed crosscut table saws. (1) Each circular crosscut table saw shall be guarded by a hood which shall meet all the requirements of paragraph (c)(1) of this section for hoods for circular ripsaws.
29 CFR 1910.213(h)(1)
(h) Radial saws. (1) The upper hood shall completely enclose the upper portion of the blade down to a point that will include the end of the saw arbor. The upper hood shall be constructed in such a manner and of such material that it will protect the operator from flying splinters, broken saw teeth, etc., and will deflect sawdust away from the operator. The sides of the lower exposed portion of the blade shall be guarded to the full diameter of the blade by a device that will automatically adjust itself to the thickness of the stock and remain in contact with stock being cut to give maximum protection possible for the operation being performed.
Alert subscribers get notified of each newly cited employer in California the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.