OSHA has inspected Hunting Titan, Inc. 2 times in Texas since 2015.
The latest one began on Jun 3, 2025 on a referral, in Milford.
Those inspections ended with 2 citation items: 2 other-than-serious.
Penalties were first proposed at $7,000 and now stand at $2,940, 58% lower after settlements or reviews.
How that compares: the median penalty per cited inspection for wholesale employers since 2015 is $3,424, and Hunting Titan, Inc. averages $1,470 (2 cited inspections).
Hunting Titan, Inc. also files yearly injury logs with OSHA, summarized below.
It reported 4 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Texas · latest 90 days of OSHA records
399employers cited
Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2024, the Milford site logged 2 recordable injuries or illnesses among about 117 workers: 1.5 per 100 full-time workers, against a median of 1.6 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Hunting Titan, Inc. - Milford
Milford · 2024
117
2
0
1.5
1.6
Hunting Titan, Inc.
Milford · 2023
120
3
0
2.0
1.6
Hunting Titan Inc
Milford · 2022
647
7
1
0.9
2.7
Severe injury reports
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 4 reports on file.
May 27, 2025, Milford: Hospitalization, amputation · amputations involving bone loss · other finger(s) n.e.c.
On 5/27/2025, during the liner press operation, the operator began to carry out the routine cleaning process. While the machine was in jog mode, the operator ejected the die up using the foot pedal. The operator then went to remove the die for cleaning and the spin function engaged, causing their left little finger to be caught between the liner die and the liner barrel. The finger was amputated at the first knuckle.
Nov 18, 2019, Milford: Hospitalization · cuts and abrasions or bruises · finger(s), fingernail(s), unspecified
An employee was operating a load press machine, working on a metal casing, when the part did not eject. The machine was under pressure and expelled the part just as the employee was reaching to get the casing. The ejected part struck the employee's ring finger causing a contusion and laceration to the ring finger.
An employee got his hand caught in a scalper device and suffered contusions and a laceration. The employee was admitted for observation and wound care.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(ii) The procedures shall clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, the following:
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
Other industrial machinery and equipment merchant wholesalers employers in Texas
Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.