Hydraulic Mudpumps Inc.: OSHA inspections and violations
Manitowoc, Wisconsin · Other Concrete Product Manufacturing · NAICS 327390
2inspections
5citation items
$3,025current penalties
Jun 30, 2016last inspection
OSHA has inspected Hydraulic Mudpumps Inc. 2 times in Wisconsin since 1995.
The latest one began on Jun 30, 2016 on a referral, in Manitowoc.
Those inspections ended with 5 citation items: 5 serious.
Penalties were first proposed at $3,025 and still stand at $3,025.
Belts, pulleys and power-transmission parts comes up most often in these citations: 2 items under 1910.219.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $4,500, and Hydraulic Mudpumps Inc. averages $2,800 (1 cited inspection).
Hydraulic Mudpumps Inc. also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Wisconsin · latest 90 days of OSHA records
229employers cited
Get notified the morning OSHA posts each new citation in Wisconsin: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2023, the Manitowoc site logged 3 recordable injuries or illnesses among about 37 workers: 8.4 per 100 full-time workers, against a median of 1.4 for its industry. Those cases cost 32 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Hydraulic Mudpumps Inc
Manitowoc · 2023
37
3
1
8.4
1.4
Hydraulic Mudpumps, INC
Manitowoc · 2020
32
0
0
0.0
1.4
Included with any plan: 2 more yearly logs from these sites, back to 2018, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(2) Guard design. The safety guard shall cover the spindle end, nut, and flange projections. The safety guard shall be mounted so as to maintain proper alignment with the wheel, and the strength of the fastenings shall exceed the strength of the guard, except:
29 CFR 1910.215(b)(9)
(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)
29 CFR 1910.219 · Belts, pulleys and power-transmission parts
29 CFR 1910.219(d)(1)
(d) Pulleys—(1) Guarding. Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section. Pulleys serving as balance wheels (e.g., punch presses) on which the point of contact between belt and pulley is more than six feet six inches (6 ft. 6 in.) from the floor or platform may be guarded with a disk covering the spokes.
Alert subscribers get notified of each newly cited employer in Wisconsin the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.