OSHA has inspected Idl Techni Edge LLC 2 times in New Jersey since 2015.
The latest one began on Aug 7, 2017 as a planned inspection, in Kenilworth.
Those inspections ended with 1 citation item: 1 serious.
Penalties were first proposed at $6,300 and now stand at $3,780, 40% lower after settlements or reviews.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Idl Techni Edge LLC averages $3,780 (1 cited inspection).
Idl Techni Edge LLC also files yearly injury logs with OSHA, summarized below.
It reported 2 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
New Jersey · latest 90 days of OSHA records
264employers cited
Get notified the morning OSHA posts each new citation in New Jersey: the employer, the site address, the rules broken and the penalty.
Incident on Jul 26, 2017: Employee's fingertip is amputated when caught in belt of gri
At 4:00 p.m. on July 26, 2017, Employee #1 was working on a transmission that was leaking oil. The employee changed the breather plug to a smaller one, and turned on the motor to see if it was getting hot. His gloved hand was pulled into the belt of the grinder, causing an amputation of the left pointer finger tip. The employee was not hospitalized.
No citations from this inspection.
Inspection 340781657 OPENED JUL 15, 2015Closed
Referral · Partial · Safety · 130 employees at the site · Closed Mar 9, 2016
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2017, the Kenilworth site logged 23 recordable injuries or illnesses among about 120 workers: 18.4 per 100 full-time workers, against a median of 3.2 for its industry. Those cases cost 215 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
IDL Techni-Edge, LLC
Kenilworth · 2017
120
23
9
18.4
3.2
Severe injury reports
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 2 reports on file.
An employee was cleaning around a machine when his cleaning rag and finger were pulled into the machine. His finger was amputated. The machine was running at the time of the incident.
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
Other cutlery and handtool manufacturing employers in New Jersey
Alert subscribers get notified of each newly cited employer in New Jersey the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.