OSHA has inspected Iko Midwest Inc. 3 times in Illinois since 2007.
The latest one began on Oct 29, 2019 on a referral, in Kankakee.
Those inspections ended with 5 citation items: 4 serious and 1 other-than-serious.
Penalties were first proposed at $54,209 and now stand at $41,924, 23% lower after settlements or reviews.
Lockout/tagout comes up most often in these citations: 2 items under 1910.147.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $4,500, and Iko Midwest Inc. averages $20,962 (2 cited inspections).
Iko Midwest Inc. also files yearly injury logs with OSHA, summarized below.
It reported 2 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Illinois · latest 90 days of OSHA records
423employers cited
Get notified the morning OSHA posts each new citation in Illinois: the employer, the site address, the rules broken and the penalty.
Incident on Oct 23, 2019: Two employees sustain burns when sprayed with hot asphalt
At 10:30 a.m. on October 23, 2019, Employee #1 and Employee #2 were repacking a leaking valve seal used in the transfer of heated roofing asphalt flux. When the valve stem was released, pressure remained in the piping causing approximately 440 degree Fahrenheit roofing asphalt flux to splash Employee #1 and Employee #2 on their head, face, chest, abdomen, arms and legs. Employee #1 and Employee #2 were driven to the hospital and eventually transferred via ambulance to the burn unit at a university medical center, where they were admitted for treatment. Employee #1 and Employee #2 suffered 2nd degree burns on less than 10% of their bodies and remained hospitalized for two days.
Incident on Dec 20, 2018: Employee's hand and finger are partially degloved
At 7:30 p.m. on December20, 2018, Employee #1, a Winder operator, was removing a piece of asphalt from a roller. As he removed the piece of asphalt from the moving roller, the two in-running nip points pulled his left hand inside of the rollers. His left hand and fingers were partially degloved. Employee #1 was hospitalized for his injuries.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Kankakee site logged 2 recordable injuries or illnesses among about 145 workers: 1.0 per 100 full-time workers, against a median of 0.6 for its industry. Those cases cost 34 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
IKO Midwest
Kankakee · 2025
145
2
1
1.0
0.6
Kankakee site
Kankakee · 2024
144
5
1
3.1
0.6
Included with any plan: 8 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Two employees were removing a steel plug from a pump. Hot asphalt sprayed their faces, causing burns.
Dec 20, 2018, Kankakee: Hospitalization · avulsions, enucleations · hand(s) and finger(s)
An employee was cleaning a spot of asphalt from two rubber-coated rollers. The employee's left hand was pulled into the nip point between the rollers; the hand and fingers were partially degloved on the top side.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.132 · Personal protective equipment, general requirements
29 CFR 1910.132(d)(2)
(2) The employer shall verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated; the person certifying that the evaluation has been performed; the date(s) of the hazard assessment; and, which identifies the document as a certification of hazard assessment.
(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.
29 CFR 1910.147(c)(7)(i)
(7) Training and communication. (i) The employer shall provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees. The training shall include the following:
Alert subscribers get notified of each newly cited employer in Illinois the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.