Ilpea Industries, Inc.: OSHA inspections and violations
Galesburg, Illinois · Rubber and Plastics Hoses and Belting Manufacturing · NAICS 326220
2inspections
9citation items
$23,112current penalties
Mar 1, 2019last inspection
Since 2015, OSHA inspectors have visited Ilpea Industries, Inc. in Illinois 2 times.
The most recent inspection opened on Mar 1, 2019 on a referral, in Galesburg.
In all, OSHA issued 9 citation items: 9 serious.
The proposed penalties came to $32,070; today they stand at $23,112, 28% less.
The rule cited most here is 1910.303 (electrical equipment, general requirements), 2 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Ilpea Industries, Inc. averages $11,556 across 2 cited inspections.
Ilpea Industries, Inc. also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Illinois · latest 90 days of OSHA records
416employers cited
Get notified the morning OSHA posts each new citation in Illinois: the employer, the site address, the rules broken and the penalty.
OSHA records show Ilpea Industries, Inc. at 5 sites in 4 states. Together they've had 12 inspections and $106,003 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 5 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
Incident on Feb 22, 2019: Employee receives amputation while working with scrap choppe
At 10:45 a.m. on February 22, 2019, an employee working on Extruder Line 8, stringing up the line, utilizing the scrap chopper. The extrusion passes through the guillotine chopper that is triggered by a timed cycle. The employee was checking pieces that had been chopped free of the continuous extrusion. During the process, the continuous extrusion caught behind the blade which cause an accumulation between the blade and the pulling belts. The employee tried to reach through the choppers range of motion to pull the material beck through the opening when the timed chopping cycle took place amputating the left index finger above the first knuckle. The employee was transported to a hospital, where the employee received an amputation of the left index finger above the first knuckle.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Galesburg site logged 4 recordable injuries or illnesses among about 68 workers: 6.0 per 100 full-time workers, against a median of 2.5 for its industry. Those cases cost 2 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
ILPEA Industries - Galesburg
Galesburg · 2025
68
4
1
6.0
2.5
ILPEA Industries, Inc.
Galesburg · 2022
84
0
0
0.0
2.5
Galesburg site
Galesburg · 2021
89
3
2
3.6
2.1
Included with any plan: 5 more yearly logs from these sites, back to 2018, with each site's average rate over its latest three years. Already a subscriber? Sign in.
At 10:45 a.m., on February 22, 2019, an employee was working at an extruder line, clearing accumulated plastic between the guillotine blade and pulley belts. The timed chopping cycle took place, amputating the employee's left index finger above the first knuckle. The employee was hospitalized, undergoing surgery.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(b) Secure storage. Storage of material shall not create a hazard. Bags, containers, bundles, etc., stored in tiers shall be stacked, blocked, interlocked and limited in height so that they are stable and secure against sliding or collapse.
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
(b) Compressed air used for cleaning. Compressed air shall not be used for cleaning purposes except where reduced to less than 30 p.s.i. and then only with effective chip guarding and personal protective equipment.
29 CFR 1910.303 · Electrical equipment, general requirements
Alert subscribers get notified of each newly cited employer in Illinois the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.