OSHA SearchOSHA records by employer

Imperial Manufacturing LLC: OSHA inspections and violations

Houston, Texas · Gypsum Product Manufacturing · NAICS 327420

1inspections
4citation items
$6,810current penalties
Nov 24, 2025last inspection

OSHA inspectors have visited Imperial Manufacturing LLC in Texas one time.

It opened on Nov 24, 2025 on a referral, in Houston.

In all, OSHA issued 4 citation items: 3 serious and 1 other-than-serious.

The proposed penalties came to $14,754; today they stand at $6,810, 54% less.

The rule cited most here is 1910.213 (woodworking machinery), 3 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Imperial Manufacturing LLC averages $6,810 across 1 cited inspection.

It reported 1 severe injury to OSHA since 2015.

Imperial Manufacturing LLC: OSHA citation items per year, 2025 to 2025
Citation items per year, by inspection date.

Texas · latest 90 days of OSHA records

391employers cited

Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Texas

Checking a subcontractor, a client or your own company? Watch Imperial Manufacturing LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 348610387 OPENED NOV 24, 2025Closed

Referral · Partial · Safety · 8 employees at the site · Closed Jul 1, 2026

521 Northville Street, Houston, TX 77037 · Gypsum Product Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.213(c)(1) · Woodworking machinery
Serious$3,972$3,972Dec 16, 2025Final
Citation 1, item 1b
29 CFR 1910.213(c)(2) · Woodworking machinery
Serious$3,972$0Dec 16, 2025Final
Citation 1, item 1c
29 CFR 1910.213(c)(3) · Woodworking machinery
Serious$3,972$0Dec 16, 2025Final
Citation 2, item 1
29 CFR 1904.39(a)(2) · Reporting deaths and severe injuries
Other-than-serious$2,838$2,838Dec 16, 2025Final

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.

Nov 17, 2025, Houston: Hospitalization, amputation · amputations involving bone loss · other finger(s) n.e.c.

An employee was cutting wood material on a table saw. The wood was pushed through and the employee reached around to get the wood when the blade grabbed his gloves. His middle finger was amputated and the index finger and thumb were severely injured.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1904.39 · Reporting deaths and severe injuries

29 CFR 1904.39(a)(2)

(2) Within twenty-four (24) hours after the in-patient hospitalization of one or more employees or an employee's amputation or an employee's loss of an eye, as a result of a work-related incident, you must report the in-patient hospitalization, amputation, or loss of an eye to OSHA.

29 CFR 1910.213 · Woodworking machinery

29 CFR 1910.213(c)(1)

(c) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po

29 CFR 1910.213(c)(2)

(2) Each hand-fed circular ripsaw shall be furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator. The spreader shall be made of hard tempered steel, or its equivalent, and shall be thinner than the saw kerf. It shall be of sufficient width to provide adequate stiffness or rigidity to resist any reasonable side thrust or blow tending to bend or throw it out of position. The spreader shall be attached so that it will remain in true alignment with the saw even when either the saw or table is tilted. The provision of a spreader in connection with grooving, dadoing, or rabbeting is not required. On the completion of such operations, the spreader shall be immediately replaced.

Other gypsum product manufacturing employers in Texas

Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.