Inspection 349133900 OPENED AUG 25, 2026Closed
1201 North 800 East, Orem, UT 84097 · Other Electronic Component Manufacturing · OSHA's record · Phone and website on Google Maps
No citations from this inspection.
Since 2025, OSHA inspectors have visited Implementing Ideas LLC in Utah 2 times.
The most recent inspection opened on Aug 25, 2026 after a complaint, in Orem.
In all, OSHA issued 3 citation items: 3 serious.
The proposed penalties came to $1,050; today they stand at $525, 50% less.
The rule cited most here is 1910.215 (grinders and abrasive wheels), 2 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Implementing Ideas LLC averages $525 across 1 cited inspection.
Want to know if OSHA cites Implementing Ideas LLC again? Add it to a watchlist and we will email you the morning the citation shows up.
Watch this companyInspection history
Inspection 348232778 OPENED MAY 8, 2025Closed
1315 W 400 S, Orem, UT 84058 · Printed Circuit Assembly (Electronic Assembly) Manufacturing · OSHA's record · Phone and website on Google Maps
| Citation and rule | Type | Proposed | Current | Issued | Status |
|---|---|---|---|---|---|
| Citation 1, item 1a 29 CFR 1910.212(a)(1) · Machine guarding |
Serious | $1,050 | $525 | May 23, 2025 | Final |
| Citation 1, item 1b 29 CFR 1910.215(a)(4) · Grinders and abrasive wheels |
Serious | $0 | $0 | May 23, 2025 | Final |
| Citation 1, item 1c 29 CFR 1910.215(b)(9) · Grinders and abrasive wheels |
Serious | $0 | $0 | May 23, 2025 | Final |
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.212 · Machine guarding
29 CFR 1910.212(a)(1)
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
29 CFR 1910.215 · Grinders and abrasive wheels
29 CFR 1910.215(a)(4)
(4) Work rests. On offhand grinding machines, work rests shall be used to support the work. They shall be of rigid construction and designed to be adjustable to compensate for wheel wear. Work rests shall be kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage. The work rest shall be securely clamped after each adjustment. The adjustment shall not be made with the wheel in motion.
29 CFR 1910.215(b)(9)
(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)
Other printed circuit assembly (electronic assembly) manufacturing employers in Utah
- Joshua Tree Technologies LLC Castle Dale · 2 citations · $2,800
- TTM Printed Circuit Group, Inc. Logan · 2 citations · $3,900
- Flextronics International USA, Inc Salt Lake City · 1 citation · $500
- Salt Lake Cable & Harness Inc. North Salt Lake · 12 citations · $2,375
- Tac Operating Company Sandy · 1 citation · $0
- Specialized Manufacturing Inc. Draper · 2 citations · $625
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.