OSHA SearchOSHA records by employer

Independent Construction: OSHA inspections and violations

San Ramon, California · Site Preparation Contractors · NAICS 238910

8inspections
11citation items
$9,275current penalties
Jun 19, 2024last inspection

Since 1989, OSHA inspectors have visited Independent Construction in California 8 times.

The most recent inspection opened on Jun 19, 2024 after an accident, in Temecula.

In all, OSHA issued 11 citation items: 5 serious and 6 other-than-serious.

The proposed penalties came to $9,900; today they stand at $9,275, 6% less.

The rule cited most here is 1926.652 (trench protection), 2 times.

Among construction employers, the typical cited inspection since 2015 ends with a $3,080 penalty. Independent Construction averages $900 across 1 cited inspection.

Independent Construction also files yearly injury logs with OSHA, summarized below.

Independent Construction: OSHA citation items per year, 1989 to 2024
Citation items per year, by inspection date.

Want to know if OSHA cites Independent Construction again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 347561763 OPENED JUN 19, 2024Closed

Accident · Partial · Safety · 20 employees at the site · Closed Jan 15, 2025

28790 Pujols St, Temecula, CA 92590 · Site Preparation Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1541(B)(5)
Other-than-serious$900$900Oct 21, 2024Final

Inspection 343409660 OPENED AUG 22, 2018Closed

Unprogrammed related · Partial · Safety · 7 employees at the site · Closed Dec 11, 2018

4 San Benito St., Hollister, CA 95023 · Site Preparation Contractors · OSHA's record · Phone and website on Google Maps

No citations from this inspection.

Inspection 301122164 OPENED SEP 2, 2004Closed

Accident · Partial · Safety · 75 employees at the site · Closed Oct 27, 2004

350 Bollinger Canyon Road, San Ramon, CA 94583 · Site Preparation Contractors · OSHA's record · Phone and website on Google Maps

Incident on Aug 19, 2004: Employee is injureds in heavy equipment rollover

On August 19, 2004, Employee #1 was driving scraper number 1 uphill on a wide di rt road. Another coworker was operating scraper number 2 that was driven ahead a nd to the right of scraper number 1. Scraper number 2 unexpectedly started a rig ht turn off the road. As it turned to the right, the rear of scraper number 2 mo ved to the left. To avoid contact with scraper number 2, Employee #1 steered scr aper number 1 to the left. Scraper number 1 went over the left embankment of the road and rolled over twice before landing upright at the bottom of the embankme nt. Employee #1 was wearing a waist seatbelt at the time of the accident, but su stained injuries including thoracic fractures. He was hospitalized for his chest injuries.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1527 A01
Other-than-serious$125$0Oct 14, 2004Closed

Inspection 125869362 OPENED OCT 30, 1998Closed

Accident · Partial · Safety · 100 employees at the site · Closed Jun 29, 2000

3911 Laura Alice Way, Concord, CA 94520 · OSHA's record · Phone and website on Google Maps

Incident on Jul 7, 1998: Employee struck in his foot by exploding grinding wheel

At approximately 10:30 a.m. on July 7, 1998, Employee #1 was grinding welding sl ag from a blocking plate. The blocking plate was connected by a pin to the blade of a Motor Grader, 16G, Number 30018. As he was grinding the slag, the grinding wheel exploded into fragments, and a piece of the fragment struck his right boo t and foot breaking the center bone. He was hospitalized at Mount Diablo Medical Center. He was wearing safety shoes.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 3583 B
Other-than-serious$850$850Dec 14, 1998Final
Citation 2, item 1
29 CFR 3583 F01
Other-than-serious$1,275$1,275Dec 14, 1998Final

Inspection 125868984 OPENED SEP 17, 1998Closed

Accident · Partial · Safety · 30 employees at the site · Closed Sep 30, 1998

350 Bollinger Canyon Road, San Ramon, CA 94583 · OSHA's record · Phone and website on Google Maps

Incident on Jun 13, 1998: Employee run over by truck

At approximately 7:00 a.m. on June 13, 1998, Employee #1 was attempting to start a compressor that was operated by a truck's engine. The compressor had been kno wn to have a problem starting. To get the compressor to operate, Employee #1 had to crawl underneath the truck and hit the low pressure valve with a hammer to u nstick the valve and make the compressor functional again. On the day of the acc ident, Employee #1 forgot to put the vehicle in neutral and set the parking brak e. When he hit the valve, the motor of the vehicle begun to race and the vehicle moved forward crushing Employee #1's pelvis. The employee was taken to the hosp ital where he underwent surgery.

No citations from this inspection.

Inspection 125514489 OPENED SEP 11, 1997Closed

Accident · Partial · Safety · 8 employees at the site · Closed Apr 2, 1998

Sharp Park Blvd./ Skyline Blvd., Pacifica, CA 94044 · OSHA's record · Phone and website on Google Maps

Incident on Aug 29, 1997: Employee suffers back injury due to slip and fall

At approximately 9:50 a.m. on August 29, 1997, Employee #1 was working to repair a leakage hydraulic hose on a large "Scraper" at a construction site. As Employ ee #1 tried to tighten a nut on the hose with a wrench, he applied force to the wrench by using his foot. Employee #1's foot slipped off the wrench and he fell. Employee #1 required hospitalization for his injuries.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1509 C
Other-than-serious$150$150Feb 11, 1998Closed

Inspection 125659334 OPENED AUG 29, 1997Closed

Accident · Partial · Safety · 80 employees at the site · Closed Oct 27, 1999

350 Bollinger Canyon Road, San Ramon, CA 94583 · OSHA's record · Phone and website on Google Maps

Incident on Aug 28, 1997: Employee injured when clothing ignited while welding

Employee #1 was seriously burned when his clothes ignited while air-arc-cutting on a fuel tank containing diesel fuel.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 5166 A
Other-than-serious$600$600Sep 22, 1997Final
Citation 3, item 1
29 CFR 5166 B02
Serious$5,000$5,000Sep 22, 1997Final

Inspection 106977317 OPENED JUN 22, 1989Closed

Referral · Complete · Safety · 9 employees at the site · Closed Sep 1, 1989

Pleasant Hill Rd./alhambra Ave., Martinez, CA 94553 · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.28(a) · Personal protective equipment
Serious$240$120Jul 31, 1989Closed
Citation 1, item 2
29 CFR 1926.601(b)(8) · Motor vehicles
Serious$280$140Jul 31, 1989Closed
Citation 1, item 3
29 CFR 1926.652(b) · Trench protection
Serious$280$140Jul 31, 1989Closed
Citation 1, item 4
29 CFR 1926.652(h) · Trench protection
Serious$200$100Jul 31, 1989Closed

Injury and illness logs

From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.

In 2020, the Concord site logged 2 recordable injuries or illnesses among about 250 workers: 1.5 per 100 full-time workers, against a median of 0.1 for its industry. Those cases cost 3 days away from work.

Site and yearWorkersCasesDays-away casesRateIndustry median
D.A. McCosker Construction Co.
Concord · 2020
250 211.50.1

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.28 · Personal protective equipment

29 CFR 1926.28(a)

(a) The employer is responsible for requiring the wearing of appropriate personal protective equipment in all operations where there is an exposure to hazardous conditions or where this part indicates the need for using such equipment to reduce the hazards to the employees.

29 CFR 1926.601 · Motor vehicles

29 CFR 1926.601(b)(8)

(8) Vehicles used to transport employees shall have seats firmly secured and adequate for the number of employees to be carried.

29 CFR 1926.652 · Trench protection

29 CFR 1926.652(b)

(b) Design of sloping and benching systems. The slopes and configurations of sloping and benching systems shall be selected and constructed by the employer or his designee and shall be in accordance with the requirements of paragraph (b)(1); or, in the alternative, paragraph (b)(2); or, in the alternative, paragraph (b)(3), or, in the alternative, paragraph (b)(4), as follows:

Other site preparation contractors employers in California

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.