Industrial Mechanical, Inc. has 3 OSHA inspections on record in Georgia, the first in 1999.
OSHA's last visit started on May 18, 2024 after a fatality or catastrophe, in Athens.
Across those inspections OSHA issued 7 citation items: 4 serious and 3 other-than-serious.
OSHA proposed $16,097 in penalties. After settlements and reviews the total is $11,347, down 30%.
Most often, OSHA cited 1910.305, electrical wiring methods (2 items).
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $3,600. Industrial Mechanical, Inc. averages $10,163 over 1 cited inspection in that time.
1 inspection on this page followed a fatal incident.
Industrial Mechanical, Inc. also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Georgia · latest 90 days of OSHA records
148employers cited
Get notified the morning OSHA posts each new citation in Georgia: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Industrial Mechanical, Inc. and get notified the morning OSHA posts a new citation for it.
Incident on May 17, 2024 (fatal): Employee is killed when struck by rough terrain forklift
At 10:00 a.m. on May 17, 2024, Employee #1 was tasked with spotting for the operator of a JLG Telehandler, along with the foreman and another tradesman, at a construction site. The crew was moving a pallet loaded with sandbags from one staging area to another to make room for incoming equipment. After completing the spotting for the load drop-off, the spotters remained in their positions. As the operator turned the rough terrain forklift to the left and moved it forward, the right rear wheel struck Employee #1, running over most of his body. Emergency services were notified by the foreman and the operator upon discovering the employee on the ground. Video evidence obtained from the University of Georgia Police Department confirmed the incident, showing the telescoping boom and forks elevated approximately ten to fifteen feet at the time of the accident. Employee #1 sustained crushing injuries, resulting in fatality.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Watkinsville site logged 2 recordable injuries or illnesses among about 269 workers: 0.8 per 100 full-time workers, against a median of 0.1 for its industry. Those cases cost 5 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Industrial Mechanical, Inc.
Watkinsville · 2025
269
2
1
0.8
0.1
Included with any plan: 6 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.
Jan 29, 2024, Watkinsville: Amputation · amputations, avulsions, enucleations unspecified · other finger(s) n.e.c.
An employee drove a forklift equipped with a tilt-hopper over to a roll-off dumpster to dump concrete and dirt from a demolition project. The employee got off the forklift and released the lever on the tilt-hopper. The employee's left hand got caught between the tilt-hopper and the roll-off dumpster resulting in a partial amputation to the middle finger and loss of skin from the pad of the ring finger.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(e) Written hazard communication program. (1) Employers shall develop, implement, and maintain at each workplace, a written hazard communication program which at least describes how the criteria specified in paragraphs (f), (g), and (h) of this section for labels and other forms of warning, safety data sheets, and employee information and training will be met, and which also includes the following:
(iii) Protection from arc welding rays. Where the work permits, the welder should be enclosed in an individual booth painted with a finish of low reflectivity such as zinc oxide (an important factor for absorbing ultraviolet radiations) and lamp black, or shall be enclosed with noncombustible screens similarly painted. Booths and screens shall permit circulation of air at floor level. Workers or other persons adjacent to the welding areas shall be protected from the rays by noncombustible or flameproof screens or shields or shall be required to wear appropriate goggles.
29 CFR 1910.303 · Electrical equipment, general requirements
29 CFR 1910.303(g)(2)(i)
(2) Guarding of live parts. (i) Except as elsewhere required or permitted by this standard, live parts of electric equipment operating at 50 volts or more shall be guarded against accidental contact by use of approved cabinets or other forms of approved enclosures or by any of the following means:
Alert subscribers get notified of each newly cited employer in Georgia the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.