OSHA SearchOSHA records by employer

Ingredion Inc.: OSHA inspections and violations

Cedar Rapids, Iowa · Flour Milling · NAICS 311211

3inspections
2citation items
$14,208current penalties
Aug 9, 2022last inspection

Since 2020, OSHA inspectors have visited Ingredion Inc. in Iowa 3 times.

The most recent inspection opened on Aug 9, 2022 after a complaint, in Cedar Rapids.

In all, OSHA issued 2 citation items: 1 serious and 1 other-than-serious.

The penalties, $14,208 in total, stand where OSHA first set them.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,875 penalty. Ingredion Inc. averages $14,208 across 1 cited inspection.

Ingredion Inc. also files yearly injury logs with OSHA, summarized below.

Ingredion Inc.: OSHA citation items per year, 2020 to 2022
Citation items per year, by inspection date.

Iowa · latest 90 days of OSHA records

69employers cited

Get notified the morning OSHA posts each new citation in Iowa: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Iowa

Checking a subcontractor, a client or your own company? Watch Ingredion Inc. and get notified the morning OSHA posts a new citation for it.

Watch this company

Company-wide record

OSHA records show Ingredion Inc. at 5 sites in 5 states. Together they've had 23 inspections and $68,402 in current penalties.

We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.

Included with any plan: the site-by-site record for all 5 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.

See plans

Inspection history

Inspection 346135924 OPENED AUG 9, 2022Closed

Complaint · Partial · Health · 170 employees at the site · Closed Jan 17, 2023

1001 1st St. Sw, Cedar Rapids, IA 52404 · Flour Milling · OSHA's record · Phone and website on Google Maps

No citations from this inspection.

Inspection 345711949 OPENED JAN 5, 2022Closed

Complaint · Partial · Health · 170 employees at the site · Closed Mar 9, 2022

1001 1st St. Sw, Cedar Rapids, IA 52404 · Flour Milling · OSHA's record · Phone and website on Google Maps

No citations from this inspection.

Inspection 344935747 OPENED SEP 18, 2020Closed

Referral · Partial · Safety · 100 employees at the site · Closed Jan 22, 2021

1001 1st St. Sw, Cedar Rapids, IA 52404 · Flour Milling · OSHA's record · Phone and website on Google Maps

Incident on Sep 9, 2020: Employee's finger is amputated by airlock rotary fan

At 1:35 a.m. on September 9, 2020, two employees were working to unclog the Blue Goose Starch Dryer Bin #2 that became caked up and would not flow. The coworker was on the second level, attempting to stick a rod down in the bin to get the starch to flow, while Employee #1 was on the ground level at the airlock. Employee #1 opened the door to the two five-inch inspection ports and stuck his hand inside one of the port holes. The airlock fan caught his finger and caused an amputation. Employee #1's left ring finger was amputated to just behind the fingernail. His finger was caught by the airlock rotary fan. Employee #1 was treated without hospitalization.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.212(a)(1) · Machine guarding
Serious$7,104$7,104Nov 19, 2020Final
Citation 1, item 2 Other-than-serious$7,104$7,104Nov 19, 2020Final

Injury and illness logs

From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.

In 2025, the Cedar Rapids site logged 3 recordable injuries or illnesses among about 162 workers: 1.8 per 100 full-time workers, against a median of 2.1 for its industry. Those cases cost 417 days away from work.

Site and yearWorkersCasesDays-away casesRateIndustry median
Cedar Rapids Facility
Cedar Rapids · 2025
162 321.82.1

Included with any plan: 9 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.

See plans

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(7)(iii)(a)

(A) Retraining shall be provided for all authorized and affected employees whenever there is a change in their job assignments, a change in machines, equipment or processes that present a new hazard, or when there is a change in the energy control procedures.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(1)

(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.

Other flour milling employers in Iowa

Alert subscribers get notified of each newly cited employer in Iowa the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.