Victoria, Texas · All Other Basic Organic Chemical Manufacturing · NAICS 325199
6inspections
6citation items
$52,492current penalties
Jul 6, 2018last inspection
OSHA has inspected Invista S.A.R.L. 6 times in Texas since 2007.
The latest one began on Jul 6, 2018 on a referral, in Orange.
Those inspections ended with 6 citation items: 6 serious.
Penalties were first proposed at $74,552 and now stand at $52,492, 30% lower after settlements or reviews.
Lockout/tagout comes up most often in these citations: 2 items under 1910.147.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $4,500, and Invista S.A.R.L. averages $26,246 (2 cited inspections).
It reported 4 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Texas · latest 90 days of OSHA records
399employers cited
Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.
OSHA records show Invista S.A.R.L. at 4 sites in 2 states. Together they've had 7 inspections and $52,667 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 4 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
Incident on Jul 2, 2018: Employee amputates fingers while installing cartridge
At 1:00 p.m. on July 2, 2108, a crane operator, was lowering a catalyst cartridge into a stationary frame. The catalyst cartridge measured four feet in diameter, 21 feet in length, and approximately 38 tons. Employee #1 and #2, mechanical technicians, were at the bottom guiding the cartridge into the support ring, and were trying to align the flanges. Employee #1 put his hands between the support ring and the cartridge. When the cartridge was lowered, it crushed his fingers, amputating them. The employee was hospitalized for his injury.
No citations from this inspection.
Inspection 342793064 OPENED NOV 27, 2017Closed
Referral · Complete · Safety · 100 employees at the site · Closed Oct 18, 2018
Incident on Nov 22, 2017: Employee is struck by release of chemical under high pressur
At 1:15 a.m. on November 22, 2017, an employee was preparing to make piping connections from a heat exchanger to a reactor. A liquid chemical under high pressure was released when bolts on the blinds were removed, striking the employee and resulting in fractured body parts.
Incident on Apr 1, 2017: Employee is shocked and burned by electrical arc flash/blast
At 10:30 a.m. on April 1, 2017, electricians were trouble shooting switch gear. An arc blast/flash occurred. One employee sustained an electrical shock and burns to the face.
An employee was part of a team of four that was moving a large catalyst cartridge using a permanent hoist. The employee was aligning flanges on the bottom of the equipment as it was lowered into place using the hoist. The cartridge was lowered onto the support ring in the cartridge housing while the employee was gripping the support ring with both hands. The employee's fingers were crushed…
Nov 22, 2017, La Porte: Hospitalization · fractures · nonclassifiable
An employee was preparing to make piping connections from a heat exchanger to a reactor when a pressurized release of liquid process material occurred. He suffered fractures and was hospitalized.
An employee was troubleshooting a switch gear when an arc blast/flash occurred, burning his face.
Mar 6, 2017, Victoria: Amputation · amputations · fingertip(s)
Two employees were removing bolts from a flange. One employee was loosening the bolts by hand and another employee was using a pneumatic socket wrench. The wrench has a bar that travels with it and the bar pinched the first employee's finger resulting in amputation of the right index fingertip.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(4) The employer shall develop and implement safe work practices to provide for the control of hazards during operations such as lockout/tagout; confined space entry; opening process equipment or piping; and control over entrance into a facility by maintenance, contractor, laboratory, or other support personnel. These safe work practices shall apply to employees and contractor employees.
29 CFR 1910.119(l)(3)
(3) Employees involved in operating a process and maintenance and contract employees whose job tasks will be affected by a change in the process shall be informed of, and trained in, the change prior to start-up of the process or affected part of the process.
(6) Verification of isolation. Prior to starting work on machines or equipment that have been locked out or tagged out, the authorized employee shall verify that isolation and deenergization of the machine or equipment have been accomplished.
Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.