OSHA SearchOSHA records by employer

Ipc Eagle Corporation: OSHA inspections and violations

Eagan, Minnesota · Industrial Machinery and Equipment Merchant Wholesalers · NAICS 423830

2inspections
9citation items
$1,885current penalties
Dec 9, 2024last inspection

Since 2009, OSHA inspectors have visited Ipc Eagle Corporation in Minnesota 2 times.

The most recent inspection opened on Dec 9, 2024 as a planned inspection, in Burnsville.

In all, OSHA issued 9 citation items: 2 serious and 7 other-than-serious.

The proposed penalties came to $2,425; today they stand at $1,885, 22% less.

The rule cited most here is 5206.700 (), 2 times.

Among wholesale employers, the typical cited inspection since 2015 ends with a $3,425 penalty. Ipc Eagle Corporation averages $1,260 across 1 cited inspection.

Ipc Eagle Corporation also files yearly injury logs with OSHA, summarized below.

Ipc Eagle Corporation: OSHA citation items per year, 2009 to 2024
Citation items per year, by inspection date.

Want to know if OSHA cites Ipc Eagle Corporation again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 347922825 OPENED DEC 9, 2024Closed

Planned · Complete · Safety · 24 employees at the site · Closed May 23, 2025

12450 Oliver Ave S Suite 300, Burnsville, MN 55337 · Other Commercial and Service Industry Machinery Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.215(a)(4) · Grinders and abrasive wheels
 Serious$450$315Dec 19, 2024Final
Citation 1, item 2
29 CFR 1910.303(b)(2) · Electrical equipment, general requirements
 Other-than-serious$750$525Dec 19, 2024Final
Citation 2, item 1
29 CFR 1910.305(g)(1)(iv) · Electrical wiring methods
 Other-than-serious$150$105Dec 19, 2024Final
Citation 2, item 2
29 CFR 1910.305(g)(2)(iii) · Electrical wiring methods
 Other-than-serious$150$105Dec 19, 2024Final
Citation 2, item 3 Other-than-serious$300$210Dec 19, 2024Final

Inspection 313819187 OPENED SEP 29, 2009Closed

Planned · Complete · Safety · 12 employees at the site · Closed Nov 10, 2009

2955 Lone Oak Dr, Suite 180, Eagan, MN 55121 · Industrial Machinery and Equipment Merchant Wholesalers · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1 Serious$375$375Oct 16, 2009Closed
Citation 2, item 1 Other-than-serious$125$125Oct 16, 2009Closed
Citation 2, item 2 Other-than-serious$0$0Oct 16, 2009Closed
Citation 2, item 3 Other-than-serious$125$125Oct 16, 2009Closed

Injury and illness logs

From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.

In 2024, the Burnsville site logged 0 recordable injuries or illnesses among about 21 workers: 0.0 per 100 full-time workers, against a median of 1.3 for its industry.

Site and yearWorkersCasesDays-away casesRateIndustry median
IPC Eagle
Burnsville · 2024
21 000.01.3

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.215 · Grinders and abrasive wheels

29 CFR 1910.215(a)(4)

(4) Work rests. On offhand grinding machines, work rests shall be used to support the work. They shall be of rigid construction and designed to be adjustable to compensate for wheel wear. Work rests shall be kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage. The work rest shall be securely clamped after each adjustment. The adjustment shall not be made with the wheel in motion.

29 CFR 1910.303 · Electrical equipment, general requirements

29 CFR 1910.303(b)(2)

(2) Installation and use. Listed or labeled equipment shall be installed and used in accordance with any instructions included in the listing or labeling.

29 CFR 1910.305 · Electrical wiring methods

29 CFR 1910.305(g)(1)(iv)

(iv) Unless specifically permitted otherwise in paragraph (g)(1)(ii) of this section, flexible cords and cables may not be used:

29 CFR 5205.1200

29 CFR 5205.1210

29 CFR 5206.700

29 CFR 5206.800

Other industrial machinery and equipment merchant wholesalers employers in Minnesota

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.