OSHA SearchOSHA records by employer

J & G Construction: OSHA inspections and violations

Lebanon, Tennessee · Framing Contractors · NAICS 238130

2inspections
12citation items
$1,860current penalties
Feb 3, 2021last inspection

Since 1984, OSHA inspectors have visited J & G Construction in Tennessee 2 times.

The most recent inspection opened on Feb 3, 2021, in Sevierville.

In all, OSHA issued 12 citation items: 6 serious and 6 other-than-serious.

The penalties, $1,860 in total, stand where OSHA first set them.

The rule cited most here is 1926.451 (scaffolds, general requirements), 3 times.

Among construction employers, the typical cited inspection since 2015 ends with a $3,080 penalty. J & G Construction averages $1,800 across 1 cited inspection.

J & G Construction: OSHA citation items per year, 1984 to 2021
Citation items per year, by inspection date.

Tennessee · latest 90 days of OSHA records

334employers cited

20 of them in the same industry

Get notified the morning OSHA posts each new citation in Tennessee: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Tennessee

Checking a subcontractor, a client or your own company? Watch J & G Construction and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 345130249 OPENED FEB 3, 2021Closed

Unprogrammed other · Complete · Safety · 6 employees at the site · Closed Feb 10, 2022

1424 Winfield Dunn Pkwy, Sevierville, TN 37876 · Framing Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1926.304(i)(1) · Woodworking tools
Serious$1,200$1,200May 18, 2021Final
Citation 1, item 1b
29 CFR 1926.304(f) · Woodworking tools
Serious$0$0May 18, 2021Final
Citation 2, item 1
29 CFR 1926.451(b)(1)(i) · Scaffolds, general requirements
Other-than-serious$150$150May 18, 2021Final
Citation 2, item 2
29 CFR 1926.451(b)(2) · Scaffolds, general requirements
Other-than-serious$150$150May 18, 2021Final
Citation 2, item 3
29 CFR 1926.451(f)(7) · Scaffolds, general requirements
Other-than-serious$150$150May 18, 2021Final
Citation 2, item 4
29 CFR 1926.452(c)(2) · Rules for each type of scaffold
Other-than-serious$150$150May 18, 2021Final
Citation 2, item 5
29 CFR 1926.454(a) · Scaffold training
Other-than-serious$0$0May 18, 2021Final

Inspection 3260619 OPENED DEC 4, 1984Closed

Planned · Complete · Safety · 7 employees at the site · Closed Dec 28, 1985

Highway 231, Lebanon, TN 37087 · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1926.400(c)(1) · Introduction
Serious$60$60Dec 18, 1984Closed
Citation 1, item 1b
29 CFR 1926.400(h)(1) · Introduction
Serious$0$0Dec 18, 1984Closed
Citation 1, item 1c
29 CFR 1926.401(a)(1) · [Reserved]
Serious$0$0Dec 18, 1984Closed
Citation 1, item 1d
29 CFR 1926.401(f) · [Reserved]
Serious$0$0Dec 18, 1984Closed
Citation 2, item 1
29 CFR 1926.100(a) · Hard hats in construction
Other-than-serious$0$0Dec 18, 1984Closed

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.100 · Hard hats in construction

29 CFR 1926.100(a)

(a) Employees working in areas where there is a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns, shall be protected by protective helmets.

29 CFR 1926.304 · Woodworking tools

29 CFR 1926.304(f)

(f) Other requirements. All woodworking tools and machinery shall meet other applicable requirements of American National Standards Institute, 01.1-1961, Safety Code for Woodworking Machinery.

29 CFR 1926.304(i)(1)

(i) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po

29 CFR 1926.400 · Introduction

29 CFR 1926.401 · [Reserved]

29 CFR 1926.451 · Scaffolds, general requirements

29 CFR 1926.452 · Rules for each type of scaffold

29 CFR 1926.454 · Scaffold training

Other framing contractors employers in Tennessee

Alert subscribers get notified of each newly cited employer in Tennessee the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.