OSHA SearchOSHA records by employer

J - E Precision Machining: OSHA inspections and violations

Delano, Minnesota · Machine Shops · NAICS 332710

1inspections
4citation items
$560current penalties
Feb 15, 2018last inspection

J - E Precision Machining has one OSHA inspection on record in Minnesota.

OSHA opened it on Feb 15, 2018 as a planned inspection, in Delano.

From that inspection OSHA issued 4 citation items: 2 serious and 2 other-than-serious.

OSHA proposed $800 in penalties. After settlements and reviews the total is $560, down 30%.

For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $3,600. J - E Precision Machining averages $560 over 1 cited inspection in that time.

J - E Precision Machining: OSHA citation items per year, 2018 to 2018
Citation items per year, by inspection date.

Want to know if OSHA cites J - E Precision Machining again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 342957164 OPENED FEB 15, 2018Closed

Planned · Complete · Safety · 28 employees at the site · Closed Mar 19, 2018

600 7th Street South, Delano, MN 55328 · Machine Shops · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.147(c)(6)(i) · Lockout/tagout
 Serious$300$210Feb 21, 2018Final
Citation 1, item 2
29 CFR 1910.212(a)(1) · Machine guarding
 Serious$300$210Feb 21, 2018Final
Citation 2, item 1
29 CFR 1910.36(d)(1) · Exit route design
 Other-than-serious$100$70Feb 21, 2018Final
Citation 2, item 2 Other-than-serious$100$70Feb 21, 2018Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(6)(i)

(6) Periodic inspection. (i) The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(1)

(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.

29 CFR 1910.36 · Exit route design

29 CFR 1910.36(d)(1)

(d) An exit door must be unlocked. (1) Employees must be able to open an exit route door from the inside at all times without keys, tools, or special knowledge. A device such as a panic bar that locks only from the outside is permitted on exit discharge doors.

29 CFR 5205.116

Other machine shops employers in Minnesota

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.