Rockford, Illinois · Other Metal Container Manufacturing · NAICS 332439
13inspections
52citation items
$192,883current penalties
Feb 16, 2021last inspection
Since 1989, OSHA inspectors have visited J. L. Clark, LLC in Illinois 13 times.
The most recent inspection opened on Feb 16, 2021 on a referral, in Rockford.
In all, OSHA issued 52 citation items: 32 serious, 2 repeat and 18 other-than-serious.
The proposed penalties came to $302,397; today they stand at $192,883, 36% less.
The rule cited most here is 1910.147 (lockout/tagout), 17 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. J. L. Clark, LLC averages $33,371 across 5 cited inspections.
J. L. Clark, LLC also files yearly injury logs with OSHA, summarized below.
It reported 5 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Illinois · latest 90 days of OSHA records
416employers cited
Get notified the morning OSHA posts each new citation in Illinois: the employer, the site address, the rules broken and the penalty.
Incident on Jul 17, 2017: Employee catches hand in machine while clearing jam and ampu
At 4:55 p.m. on July 17, 20917, an employee was clearing a jam from the Altoids South Machine Line (Minster P2-100-26850). The employee's hand was caught by the machine when a coworker cycled it while the employee's hand was still in the machine. The employee amputated their hand.
Incident on Mar 16, 2017: Employee catches hand in nip point and suffers multiple inju
At 9:50 p.m. on March 16, 2017, an employee was operating a steel sheet metal production machine in the automated mode and at normal production speed to carry out product test run checking on new coil proper sheet setup configuration. The employee was performing regular servicing machine setup tasks when his right hand became caught-in the nip point of two rotating air-powered in-feed horizontal rollers (36 inch long rollers, positioned vertically to each other) used for pulling steel sheet from the steel sheet coil located on the nearby mandrel coil station about six feet away. The employee's pinky fingertip part of the glove contacted the nip point and was pulled into a small opening nip with the right hand getting caught between subject rollers. After being extracted from the machine, the employee was transported to the local emergency room at the medical center in Rockford, IL. On March, 17, 2017, the employee was transported to University of Wisconsin Medical Center where he was hospitalized and was released two days later. The employee suffered right hand de-gloving injury with thumb, index, and middle finger lacerations, hairline fractures, and pins installed during surgery.
Incident on Feb 4, 2017: Employee is caught in machine and has several fingers amputa
At 7:45 a.m. on February 4, 2017, an employee was cleaning coating tracks inside coding machine #8 (Crabtree 1988/1989; model Fast Ready; S# F5948). The employee had noticed that there was a sheet that was stuck and proceeded to take steps to remove the sheet. The employee stopped the machine and removed the pan. In the process, the employee spilled paint and then began to clean up the spill. After the sheet was removed, the employee ran four recycled sheets through to assess if the machine was clean and ready for normal runs. The sheet came out with paint on the back area signaling the operator the machine required some additional cleaning. The employee stuck his hand into the machine while it was running. The employee's hand was caught in the rollers and his left index, middle and ring finger were partially amputated. amputated.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Rockford site logged 3 recordable injuries or illnesses among about 263 workers: 1.0 per 100 full-time workers, against a median of 2.8 for its industry. Those cases cost 2 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
J.L. Clark Inc.
Rockford · 2025
263
3
1
1.0
2.8
J.L.Clark
Rockford · 2025
54
1
0
1.7
2.6
J.L. Clark
Rockford · 2024
143
2
1
1.5
2.8
010RCK-010-Jlclark - Rockford
Rockford · 2019
260
9
2
3.5
2.8
Included with any plan: 6 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
While a truck was being moved, a conveyor shifted in a trailer. An employee went up into the trailer to move the conveyor. The conveyor began to tip and struck the employee in the right thigh.
An employee was removing jammed material from a machine when his right middle and ring fingertips were caught and amputated in the machine, which was unguarded at the time.
On March 16, 2017, at approximately 9:50 p.m., an employee was hand cleaning the powered in-feed rollers used for pulling steel sheet from the steel sheet coil located on the nearby mandrel using a rag with a solvent when the employee's right hand was pulled in between the two rollers and crushed.
While cleaning a lithography press, an employee's rag and left hand were pulled into the roller's point of operation. The machine was running at the time and the employee's hand was partially degloved and his left index, middle and ring fingers were partially amputated. The employee was hospitalized.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1904.2 · Partial exemption for establishments in certain industries
(v) Storage in inside storage rooms. In every inside storage room there shall be maintained one clear aisle at least 3 feet wide. Containers over 30 gallons capacity shall not be stacked one upon the other. Dispensing shall be by approved pump or self-closing faucet only.
29 CFR 1910.106(e)(2)(iva)
(iv) Handling liquids at point of final use. (a) Category 1 or 2 flammable liquids, or Category 3 flammable liquids with a flashpoint below 100 °F (37.8 °C), shall be kept in covered containers when not actually in use.
29 CFR 1910.106(e)(6)(ii)
(ii) Grounding. Category 1 or 2 flammable liquids, or Category 3 flammable liquids with a flashpoint below 100 °F (37.8 °C), shall not be dispensed into containers unless the nozzle and container are electrically interconnected. Where the metallic floorplate on which the container stands while filling is electrically connected to the fill stem or where the fill stem is bonded to the container during filling operations by means of a bond wire, the provisions of this section shall be deemed to have been complied with.
Alert subscribers get notified of each newly cited employer in Illinois the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.