OSHA SearchOSHA records by employer

J.L. Industrial Machine Shop: OSHA inspections and violations

Socorro, Texas · Machine Shops · NAICS 332710

1inspections
3citation items
$4,800current penalties
Mar 11, 2026last inspection

OSHA inspectors have visited J.L. Industrial Machine Shop in Texas one time.

It opened on Mar 11, 2026 as a planned inspection, in Socorro and is still open.

In all, OSHA issued 3 citation items: 3 serious.

The proposed penalties came to $7,378; today they stand at $4,800, 35% less.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. J.L. Industrial Machine Shop averages $4,800 across 1 cited inspection.

J.L. Industrial Machine Shop: OSHA citation items per year, 2026 to 2026
Citation items per year, by inspection date.

Texas · latest 90 days of OSHA records

399employers cited

5 of them in the same industry

Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Texas

Checking a subcontractor, a client or your own company? Watch J.L. Industrial Machine Shop and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 348799693 OPENED MAR 11, 2026Open

Planned · Partial · Safety · 3 employees at the site · Open

10261 North Loop Drive, Socorro, TX 79927 · Machine Shops · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.147(c)(1) · Lockout/tagout
Serious$2,838$2,000Jul 23, 2026Final
Citation 1, item 2
29 CFR 1910.212(a)(1) · Machine guarding
Serious$2,838$2,000Jul 23, 2026Final
Citation 1, item 3
29 CFR 1910.215(a)(4) · Grinders and abrasive wheels
Serious$1,702$800Jul 23, 2026Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(1)

(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(1)

(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.

29 CFR 1910.215 · Grinders and abrasive wheels

29 CFR 1910.215(a)(4)

(4) Work rests. On offhand grinding machines, work rests shall be used to support the work. They shall be of rigid construction and designed to be adjustable to compensate for wheel wear. Work rests shall be kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage. The work rest shall be securely clamped after each adjustment. The adjustment shall not be made with the wheel in motion.

Other machine shops employers in Texas

Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.