OSHA has inspected Jadtis Industries, LP 2 times in Texas since 2019.
The latest one began on May 16, 2024 on a referral, in Farmers Branch.
Those inspections ended with 3 citation items: 3 serious.
Penalties were first proposed at $15,970 and now stand at $9,582, 40% lower after settlements or reviews.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $4,875, and Jadtis Industries, LP averages $9,582 (1 cited inspection).
Jadtis Industries, LP also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Texas · latest 90 days of OSHA records
393employers cited
Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2018, the Farmers Branch site logged 7 recordable injuries or illnesses among about 65 workers: 9.8 per 100 full-time workers, against a median of 3.6 for its industry. Those cases cost 12 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Jadtis Industries, LP
Farmers Branch · 2018
65
7
1
9.8
3.6
Included with any plan: 1 more yearly log from these sites, back to 2017, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.
May 13, 2024, Farmers Branch: Amputation · amputations involving bone loss · other finger(s) n.e.c.
An employee was operating a sheet metal shear. They stopped and shut the machine off to fix a piece of metal that was bending. The machine was turned on again, and the employee's left middle finger was amputated at the first joint.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.
29 CFR 1910.219 · Belts, pulleys and power-transmission parts
29 CFR 1910.219(b)(1)
(b) Prime-mover guards—(1) Flywheels. Flywheels located so that any part is seven (7) feet or less above floor or platform shall be guarded in accordance with the requirements of this subparagraph:
(iii) Flexible cords and cables shall be connected to devices and fittings so that strain relief is provided that will prevent pull from being directly transmitted to joints or terminal screws.
Other rope, cordage, twine, tire cord, and tire fabric mills employers in Texas
Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.