OSHA has inspected Jam Industries Inc 2 times in New York since 2015.
The latest one began on May 16, 2023 as a planned inspection, in Rochester.
Those inspections ended with 6 citation items: 3 serious and 3 other-than-serious.
Penalties were first proposed at $15,787 and now stand at $9,740, 38% lower after settlements or reviews.
Lockout/tagout comes up most often in these citations: 3 items under 1910.147.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Jam Industries Inc averages $4,870 (2 cited inspections).
Jam Industries Inc also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
New York · latest 90 days of OSHA records
353employers cited
10 of them in the same industry
Get notified the morning OSHA posts each new citation in New York: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2024, the Rochester site logged 1 recordable injury or illness among about 86 workers: 1.3 per 100 full-time workers, against a median of 2.7 for its industry. Those cases cost 5 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Jam Industries, Inc
Rochester · 2024
86
1
1
1.3
2.7
Included with any plan: 5 more yearly logs from these sites, back to 2017, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.
Aug 25, 2015, Rochester: Amputation · amputations · fingertip(s)
A worker was wearing leather work gloves and cutting aluminum bar stock on a horizontal band saw. His hand contacted the moving saw blade and was pulled in causing an amputation of the left index fingertip.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(e) Written hazard communication program. (1) Employers shall develop, implement, and maintain at each workplace, a written hazard communication program which at least describes how the criteria specified in paragraphs (f), (g), and (h) of this section for labels and other forms of warning, safety data sheets, and employee information and training will be met, and which also includes the following:
(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.
29 CFR 1910.147(c)(5)(ii)
(ii) Lockout devices and tagout devices shall be singularly identified; shall be the only devices(s) used for controlling energy; shall not be used for other purposes; and shall meet the following requirements:
Alert subscribers get notified of each newly cited employer in New York the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.