Jamestown Container Corporation has 5 OSHA inspections on record in New York, the first in 1981.
OSHA's last visit started on Jun 14, 2016 on a referral, in Rochester.
Across those inspections OSHA issued 4 citation items: 2 serious and 2 other-than-serious.
OSHA proposed $12,671 in penalties. After settlements and reviews the total is $9,433, down 26%.
Most often, OSHA cited 1910.212, machine guarding (2 items).
For context, across all transportation and warehousing employers the median penalty per cited inspection since 2015 is $2,416. Jamestown Container Corporation averages $9,353 over 1 cited inspection in that time.
Jamestown Container Corporation also files yearly injury logs with OSHA, summarized below.
It reported 3 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
New York · latest 90 days of OSHA records
362employers cited
Get notified the morning OSHA posts each new citation in New York: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Jamestown Container Corporation and get notified the morning OSHA posts a new citation for it.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Falconer site logged 7 recordable injuries or illnesses among about 119 workers: 5.9 per 100 full-time workers, against a median of 2.1 for its industry. Those cases cost 134 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Jamestown Container Corporation
Falconer · 2025
119
7
1
5.9
2.1
Jamestown Container Corporation, Cattaraugus C
Falconer · 2021
32
1
0
2.9
2.1
Included with any plan: 8 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 3 reports on file.
Jun 9, 2016, Rochester: Hospitalization, amputation · amputations, avulsions, enucleations, n.e.c. · hand(s) and finger(s)
An employee was repositioning a piece of cardboard over the vacuum holes of a printing press when the piece was drawn into the machine. His left hand was also pulled in, de-gloving the top of the hand and amputating the index finger.
Dec 7, 2015, Rochester: Hospitalization · fractures and other injuries, n.e.c. · hand(s) and finger(s)
An employee was adjusting a printing plate and got his hand caught in a pinch point between two rollers when another employee jogged the machine using the registration button. The employee suffered three broken fingers and a degloving injury to the right palm.
An employee pulled Printing Section # 1 out of the Martin Machine and opened the interlocked cover on the ink rollers. He then took a pair of vise-grips, depressed the jog button, and clamped the button to the housing in the depressed position causing the rollers to rotate slowly. The employee then used a hose to spray water on the partially submerged ink rollers to clean them. The inside of the…
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
29 CFR 1910.212(a)(3)(ii)
(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.
(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)
Alert subscribers get notified of each newly cited employer in New York the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.