OSHA SearchOSHA records by employer

Jayro Vivas: OSHA inspections and violations

Gulf Shores, Alabama · Framing Contractors · NAICS 238130

3inspections
7citation items
$32,230current penalties
Oct 18, 2022last inspection

OSHA has inspected Jayro Vivas 3 times in Alabama since 2019.

The latest one began on Oct 18, 2022 as a planned inspection, in Gulf Shores.

Those inspections ended with 7 citation items: 5 serious and 2 repeat.

Penalties were first proposed at $33,929 and now stand at $32,230, 5% lower after settlements or reviews.

Fall protection in construction comes up most often in these citations: 3 items under 1926.501.

How that compares: the median penalty per cited inspection for construction employers since 2015 is $3,079, and Jayro Vivas averages $10,743 (3 cited inspections).

Jayro Vivas: OSHA citation items per year, 2019 to 2022
Citation items per year, by inspection date.

Want to know if OSHA cites Jayro Vivas again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 346287568 OPENED OCT 18, 2022Closed

Planned · Partial · Safety · 6 employees at the site · Closed Nov 21, 2025

7047 Marble Court Lot 40 Stonehaven, Gulf Shores, AL 36542 · Framing Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.102(a)(1) · Eye and face protection in construction
 Serious$2,486$2,486Oct 31, 2022Final
Citation 1, item 2
29 CFR 1926.304(d) · Woodworking tools
 Serious$2,486$2,486Oct 31, 2022Final
Citation 2, item 1
29 CFR 1926.501(b)(13) · Fall protection in construction
 Repeat$18,647$18,647Oct 31, 2022Final

Inspection 345013759 OPENED NOV 5, 2020Closed

Planned · Partial · Safety · 5 employees at the site · Closed Aug 12, 2021

230 Hemlock Dr. Lot 87 Firethorne, Fairhope, AL 36532 · Framing Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.501(b)(13) · Fall protection in construction
 Repeat$4,627$4,627Nov 23, 2020Final

Inspection 344234950 OPENED AUG 15, 2019Closed

Planned · Partial · Safety · 5 employees at the site · Closed Dec 31, 2019

3992 Stafford Blvd. Lot 1 Aventura, Gulf Shores, AL 36542 · Framing Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1926.501(b)(13) · Fall protection in construction
 Serious$3,410$2,387Aug 16, 2019Final
Citation 1, item 1b
29 CFR 1926.503(a)(1) · Fall protection training in construction
 Serious$0$0Aug 16, 2019Final
Citation 1, item 2
29 CFR 1926.1053(b)(1) · Ladders in construction
 Serious$2,273$1,597Aug 16, 2019Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.102 · Eye and face protection in construction

29 CFR 1926.102(a)(1)

(a) General. (1) The employer shall ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation.

29 CFR 1926.1053 · Ladders in construction

29 CFR 1926.1053(b)(1)

(1) When portable ladders are used for access to an upper landing surface, the ladder side rails shall extend at least 3 feet (.9 m) above the upper landing surface to which the ladder is used to gain access; or, when such an extension is not possible because of the ladder's length, then the ladder shall be secured at its top to a rigid support that will not deflect, and a grasping device, such as a grabrail, shall be provided to assist employees in mounting and dismounting the ladder. In no case shall the extension be such that ladder deflection under a load would, by itself, cause the ladder to slip off its support.

29 CFR 1926.304 · Woodworking tools

29 CFR 1926.304(d)

(d) Guarding. All portable, power-driven circular saws shall be equipped with guards above and below the base plate or shoe. The upper guard shall cover the saw to the depth of the teeth, except for the minimum arc required to permit the base to be tilted for bevel cuts. The lower guard shall cover the saw to the depth of the teeth, except for the minimum arc required to allow proper retraction and contact with the work. When the tool is withdrawn from the work, the lower guard shall automatically and instantly return to the covering position.

29 CFR 1926.501 · Fall protection in construction

29 CFR 1926.503 · Fall protection training in construction

Other framing contractors employers in Alabama

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.