OSHA SearchOSHA records by employer

Jeremias Martinez: OSHA inspections and violations

Greensboro, North Carolina · Roofing Contractors · NAICS 238160

2inspections
7citation items
$11,300current penalties
Oct 13, 2020last inspection

Since 2017, OSHA inspectors have visited Jeremias Martinez in North Carolina 2 times.

The most recent inspection opened on Oct 13, 2020 as a planned inspection, in Winston Salem.

In all, OSHA issued 7 citation items: 4 serious, 2 repeat and 1 other-than-serious.

The penalties, $11,300 in total, stand where OSHA first set them.

The rule cited most here is 1926.503 (fall protection training in construction), 2 times.

Among construction employers, the typical cited inspection since 2015 ends with a $3,080 penalty. Jeremias Martinez averages $5,650 across 2 cited inspections.

Jeremias Martinez: OSHA citation items per year, 2017 to 2020
Citation items per year, by inspection date.

North Carolina · latest 90 days of OSHA records

228employers cited

18 of them in the same industry

Get notified the morning OSHA posts each new citation in North Carolina: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in North Carolina

Checking a subcontractor, a client or your own company? Watch Jeremias Martinez and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 344971429 OPENED OCT 13, 2020Closed

Planned · Complete · Safety · 9 employees at the site · Closed Feb 7, 2025

2259 West Clemmonsville Road, Winston Salem, NC 27127 · Roofing Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.300(b)(2) · Tools—Hand and Power: general requirements
Serious$1,500$1,500Oct 22, 2020Final
Citation 1, item 2a
29 CFR 1926.501(b)(10) · Fall protection in construction
Serious$2,100$2,100Oct 22, 2020Final
Citation 1, item 2b
29 CFR 1926.503(b)(1) · Fall protection training in construction
Serious$0$0Oct 22, 2020Final
Citation 1, item 3
29 CFR 1926.1053(b)(1) · Ladders in construction
Serious$2,100$2,100Oct 22, 2020Final

Inspection 342553518 OPENED AUG 15, 2017Closed

Planned · Complete · Safety · 7 employees at the site · Closed Jun 23, 2023

605 S Regional Rd., Greensboro, NC 27409 · Roofing Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1926.501(b)(10) · Fall protection in construction
Repeat$5,600$5,600Sep 25, 2017Final
Citation 1, item 2b
29 CFR 1926.503(a)(2) · Fall protection training in construction
Repeat$0$0Sep 25, 2017Final
Citation 2, item 1
29 CFR 1926.25(a) · Housekeeping
Other-than-serious$0$0Sep 25, 2017Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.1053 · Ladders in construction

29 CFR 1926.1053(b)(1)

(1) When portable ladders are used for access to an upper landing surface, the ladder side rails shall extend at least 3 feet (.9 m) above the upper landing surface to which the ladder is used to gain access; or, when such an extension is not possible because of the ladder's length, then the ladder shall be secured at its top to a rigid support that will not deflect, and a grasping device, such as a grabrail, shall be provided to assist employees in mounting and dismounting the ladder. In no case shall the extension be such that ladder deflection under a load would, by itself, cause the ladder to slip off its support.

29 CFR 1926.25 · Housekeeping

29 CFR 1926.25(a)

(a) During the course of construction, alteration, or repairs, form and scrap lumber with protruding nails, and all other debris, shall be kept cleared from work areas, passageways, and stairs, in and around buildings or other structures.

29 CFR 1926.300 · Tools—Hand and Power: general requirements

29 CFR 1926.300(b)(2)

(2) Belts, gears, shafts, pulleys, sprockets, spindles, drums, fly wheels, chains, or other reciprocating, rotating or moving parts of equipment shall be guarded if such parts are exposed to contact by employees or otherwise create a hazard. Guarding shall meet the requirements as set forth in American National Standards Institute, B15.1-1953 (R1958), Safety Code for Mechanical Power-Transmission Apparatus.

29 CFR 1926.501 · Fall protection in construction

29 CFR 1926.503 · Fall protection training in construction

Other roofing contractors employers in North Carolina

Alert subscribers get notified of each newly cited employer in North Carolina the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.