OSHA SearchOSHA records by employer

Jerry Muse: OSHA inspections and violations

Andersonville, Tennessee · Roofing Contractors · NAICS 238160

1inspections
5citation items
$6,400current penalties
Jul 3, 2018last inspection

OSHA has inspected Jerry Muse once in Tennessee.

The inspection began on Jul 3, 2018 as a planned inspection, in Andersonville; the case is still open.

That inspection ended with 5 citation items: 4 serious and 1 other-than-serious.

Penalties were first proposed at $6,400 and still stand at $6,400.

Fall protection in construction comes up most often in these citations: 2 items under 1926.501.

How that compares: the median penalty per cited inspection for construction employers since 2015 is $3,080, and Jerry Muse averages $6,400 (1 cited inspection).

Jerry Muse: OSHA citation items per year, 2018 to 2018
Citation items per year, by inspection date.

Want to know if OSHA cites Jerry Muse again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 343275228 OPENED JUL 3, 2018Open

Planned · Complete · Safety · 7 employees at the site · Open

175 Alley Rd., Andersonville, TN 37705 · Roofing Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1926.501(b)(10) · Fall protection in construction
 Serious$4,000$4,000Sep 5, 2018Final
Citation 1, item 1b
29 CFR 1926.501(b)(11) · Fall protection in construction
 Serious$0$0Sep 5, 2018Final
Citation 1, item 2
29 CFR 1926.503(a)(1) · Fall protection training in construction
 Serious$1,050$1,050Sep 5, 2018Final
Citation 1, item 3
29 CFR 1926.1053(b)(1) · Ladders in construction
 Serious$1,050$1,050Sep 5, 2018Final
Citation 2, item 1
29 CFR TDLWD RULE 800-01-04-.23(4)(A)
 Other-than-serious$300$300Apr 5, 2019Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.1053 · Ladders in construction

29 CFR 1926.1053(b)(1)

(1) When portable ladders are used for access to an upper landing surface, the ladder side rails shall extend at least 3 feet (.9 m) above the upper landing surface to which the ladder is used to gain access; or, when such an extension is not possible because of the ladder's length, then the ladder shall be secured at its top to a rigid support that will not deflect, and a grasping device, such as a grabrail, shall be provided to assist employees in mounting and dismounting the ladder. In no case shall the extension be such that ladder deflection under a load would, by itself, cause the ladder to slip off its support.

29 CFR 1926.501 · Fall protection in construction

29 CFR 1926.501(b)(10)

(10) Roofing work on Low-slope roofs. Except as otherwise provided in paragraph (b) of this section, each employee engaged in roofing activities on low-slope roofs, with unprotected sides and edges 6 feet (1.8 m) or more above lower levels shall be protected from falling by guardrail systems, safety net systems, personal fall arrest systems, or a combination of warning line system and guardrail system, warning line system and safety net system, or warning line system and personal fall arrest system, or warning line system and safety monitoring system. Or, on roofs 50-feet (15.25 m) or less in width (see appendix A to subpart M of this part), the use of a safety monitoring system alone [i.e. without the warning line system] is permitted.

29 CFR 1926.501(b)(11)

(11) Steep roofs. Each employee on a steep roof with unprotected sides and edges 6 feet (1.8 m) or more above lower levels shall be protected from falling by guardrail systems with toeboards, safety net systems, or personal fall arrest systems.

29 CFR 1926.503 · Fall protection training in construction

Other roofing contractors employers in Tennessee

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.