OSHA SearchOSHA records by employer

Josh Johnson: OSHA inspections and violations

Spring Hill, Tennessee · Site Preparation Contractors · NAICS 238910

1inspections
10citation items
$7,726current penalties
May 25, 2017last inspection

OSHA inspectors have visited Josh Johnson in Tennessee one time.

It opened on May 25, 2017 as a planned inspection, in Spring Hill.

In all, OSHA issued 10 citation items: 10 serious.

The proposed penalties came to $10,300; today they stand at $7,726, 25% less.

The rule cited most here is 1926.651 (excavations), 4 times.

Among construction employers, the typical cited inspection since 2015 ends with a $3,079 penalty. Josh Johnson averages $7,726 across 1 cited inspection.

Josh Johnson: OSHA citation items per year, 2017 to 2017
Citation items per year, by inspection date.

Want to know if OSHA cites Josh Johnson again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 342355914 OPENED MAY 25, 2017Closed

Planned · Complete · Safety · 6 employees at the site · Closed Sep 19, 2017

2000 Brisbane Drive, Spring Hill, TN 37174 · Site Preparation Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.21(b)(2) · Construction safety training
Serious$1,050$788Jul 14, 2017Final
Citation 1, item 2
29 CFR 1926.50(c) · Medical services and first aid
Serious$300$225Jul 14, 2017Final
Citation 1, item 3
29 CFR 1926.100(a) · Hard hats in construction
Serious$900$675Jul 14, 2017Final
Citation 1, item 4
29 CFR 1926.651(c)(2) · Excavations
Serious$1,200$900Jul 14, 2017Final
Citation 1, item 5
29 CFR 1926.651(e) · Excavations
Serious$900$675Jul 14, 2017Final
Citation 1, item 6
29 CFR 1926.651(j)(2) · Excavations
Serious$1,200$900Jul 14, 2017Final
Citation 1, item 7a
29 CFR 1926.651(k)(1) · Excavations
Serious$4,000$3,000Jul 14, 2017Final
Citation 1, item 7b
29 CFR 1926.652(a)(1) · Trench protection
Serious$0$0Jul 14, 2017Final
Citation 1, item 8a
29 CFR 1926.1053(b)(1) · Ladders in construction
Serious$750$563Jul 14, 2017Final
Citation 1, item 8b
29 CFR 1926.1060(a) · Ladder and stairway training
Serious$0$0Jul 14, 2017Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.100 · Hard hats in construction

29 CFR 1926.100(a)

(a) Employees working in areas where there is a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns, shall be protected by protective helmets.

29 CFR 1926.1053 · Ladders in construction

29 CFR 1926.1053(b)(1)

(1) When portable ladders are used for access to an upper landing surface, the ladder side rails shall extend at least 3 feet (.9 m) above the upper landing surface to which the ladder is used to gain access; or, when such an extension is not possible because of the ladder's length, then the ladder shall be secured at its top to a rigid support that will not deflect, and a grasping device, such as a grabrail, shall be provided to assist employees in mounting and dismounting the ladder. In no case shall the extension be such that ladder deflection under a load would, by itself, cause the ladder to slip off its support.

29 CFR 1926.1060 · Ladder and stairway training

29 CFR 1926.1060(a)

(a) The employer shall provide a training program for each employee using ladders and stairways, as necessary. The program shall enable each employee to recognize hazards related to ladders and stairways, and shall train each employee in the procedures to be followed to minimize these hazards.

29 CFR 1926.21 · Construction safety training

29 CFR 1926.50 · Medical services and first aid

29 CFR 1926.651 · Excavations

29 CFR 1926.652 · Trench protection

Other site preparation contractors employers in Tennessee

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.