OSHA SearchOSHA records by employer

JPM Carpentry, LLC: OSHA inspections and violations

Wolcott, Connecticut · Roofing Contractors · NAICS 238160

1inspections
3citation items
$2,160current penalties
Dec 11, 2015last inspection

OSHA has inspected JPM Carpentry, LLC once in Connecticut.

The inspection began on Dec 11, 2015 on a referral, in Wolcott.

That inspection ended with 3 citation items: 3 serious.

Penalties were first proposed at $3,600 and now stand at $2,160, 40% lower after settlements or reviews.

How that compares: the median penalty per cited inspection for construction employers since 2015 is $3,080, and JPM Carpentry, LLC averages $2,160 (1 cited inspection).

JPM Carpentry, LLC: OSHA citation items per year, 2015 to 2015
Citation items per year, by inspection date.

Want to know if OSHA cites JPM Carpentry, LLC again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 341119220 OPENED DEC 11, 2015Closed

Referral · Partial · Safety · 8 employees at the site · Closed Nov 30, 2016

137 Tosun Rd., Wolcott, CT 06716 · Roofing Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1926.501(b)(10) · Fall protection in construction
 Serious$2,000$1,200Jan 20, 2016Final
Citation 1, item 1b
29 CFR 1926.503(a)(1) · Fall protection training in construction
 Serious$0$0Jan 20, 2016Final
Citation 1, item 2
29 CFR 1926.1053(b)(1) · Ladders in construction
 Serious$1,600$960Jan 20, 2016Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.1053 · Ladders in construction

29 CFR 1926.1053(b)(1)

(1) When portable ladders are used for access to an upper landing surface, the ladder side rails shall extend at least 3 feet (.9 m) above the upper landing surface to which the ladder is used to gain access; or, when such an extension is not possible because of the ladder's length, then the ladder shall be secured at its top to a rigid support that will not deflect, and a grasping device, such as a grabrail, shall be provided to assist employees in mounting and dismounting the ladder. In no case shall the extension be such that ladder deflection under a load would, by itself, cause the ladder to slip off its support.

29 CFR 1926.501 · Fall protection in construction

29 CFR 1926.501(b)(10)

(10) Roofing work on Low-slope roofs. Except as otherwise provided in paragraph (b) of this section, each employee engaged in roofing activities on low-slope roofs, with unprotected sides and edges 6 feet (1.8 m) or more above lower levels shall be protected from falling by guardrail systems, safety net systems, personal fall arrest systems, or a combination of warning line system and guardrail system, warning line system and safety net system, or warning line system and personal fall arrest system, or warning line system and safety monitoring system. Or, on roofs 50-feet (15.25 m) or less in width (see appendix A to subpart M of this part), the use of a safety monitoring system alone [i.e. without the warning line system] is permitted.

29 CFR 1926.503 · Fall protection training in construction

29 CFR 1926.503(a)(1)

(a) Training program. (1) The employer shall provide a training program for each employee who might be exposed to fall hazards. The program shall enable each employee to recognize the hazards of falling and shall train each employee in the procedures to be followed in order to minimize these hazards.

Other roofing contractors employers in Connecticut

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.