OSHA SearchOSHA records by employer

JR Custom Plating: OSHA inspections and violations

North Branch, Minnesota · Electroplating, Plating, Polishing, Anodizing, and Coloring · NAICS 332813

1inspections
5citation items
$1,625current penalties
Jan 12, 2017last inspection

OSHA has inspected JR Custom Plating once in Minnesota.

The inspection began on Jan 12, 2017 as a planned inspection, in North Branch.

That inspection ended with 5 citation items: 4 serious and 1 other-than-serious.

Penalties were first proposed at $1,625 and still stand at $1,625.

Hazard communication comes up most often in these citations: 2 items under 1910.1200.

How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and JR Custom Plating averages $1,625 (1 cited inspection).

JR Custom Plating: OSHA citation items per year, 2017 to 2017
Citation items per year, by inspection date.

Want to know if OSHA cites JR Custom Plating again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 342026499 OPENED JAN 12, 2017Closed

Planned · Complete · Safety · 8 employees at the site · Closed Feb 17, 2017

39374 Grand Ave, North Branch, MN 55056 · Electroplating, Plating, Polishing, Anodizing, and Coloring · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 182.653(08)
 Serious$250$250Jan 24, 2017Final
Citation 1, item 2
29 CFR 1910.213(i)(1) · Woodworking machinery
 Serious$625$625Jan 24, 2017Final
Citation 1, item 3
29 CFR 1910.242(b) · Hand and power tools
 Serious$375$375Jan 24, 2017Final
Citation 1, item 4
29 CFR 1910.1200(h)(1) · Hazard communication
 Serious$375$375Jan 24, 2017Final
Citation 2, item 1
29 CFR 1910.1200(e)(1) · Hazard communication
 Other-than-serious$0$0Jan 24, 2017Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.1200 · Hazard communication

29 CFR 1910.1200(e)(1)

(e) Written hazard communication program. (1) Employers shall develop, implement, and maintain at each workplace, a written hazard communication program which at least describes how the criteria specified in paragraphs (f), (g), and (h) of this section for labels and other forms of warning, safety data sheets, and employee information and training will be met, and which also includes the following:

29 CFR 1910.1200(h)(1)

(h) Employee information and training. (1) Employers shall provide employees with effective information and training on hazardous chemicals in their work area at the time of their initial assignment, and whenever a new chemical hazard the employees have not previously been trained about is introduced into their work area. Information and training may be designed to cover categories of hazards (e.g., flammability, carcinogenicity) or specific chemicals. Chemical-specific information must always be available through labels and safety data sheets.

29 CFR 1910.213 · Woodworking machinery

29 CFR 1910.213(i)(1)

(i) Bandsaws and band resaws. (1) All portions of the saw blade shall be enclosed or guarded, except for the working portion of the blade between the bottom of the guide rolls and the table. Bandsaw wheels shall be fully encased. The outside periphery of the enclosure shall be solid. The front and back of the band wheels shall be either enclosed by solid material or by wire mesh or perforated metal. Such mesh or perforated metal shall be not less than 0.037 inch (U.S. Gage No. 20), and the openings shall be not greater than three-eighths inch. Solid material used for this purpose shall be of an equivalent strength and firmness. The guard for the portion of the blade between the sliding guide and the upper-saw-wheel guard shall protect the saw blade at the front and outer side. This portion of the guard shall be self-adjusting to raise and lower with the guide. The upper-wheel guard shall

29 CFR 1910.242 · Hand and power tools

Other electroplating, plating, polishing, anodizing, and coloring employers in Minnesota

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.