Inspection 345913461 OPENED APR 21, 2022Closed
6327 Tower Avenue, Superior, WI 54880 · General Freight Trucking, Local · OSHA's record · Phone and website on Google Maps
No citations from this inspection.
OSHA has inspected K. Kimmes Excavating, Inc. 3 times in Wisconsin since 2020.
The latest one began on Apr 21, 2022 to follow up on an earlier case, in Superior.
Those inspections ended with 3 citation items: 1 serious and 2 other-than-serious.
Penalties were first proposed at $4,754 and still stand at $4,754.
Proving cited hazards were fixed comes up most often in these citations: 2 items under 1903.19.
How that compares: the median penalty per cited inspection for transportation and warehousing employers since 2015 is $2,416, and K. Kimmes Excavating, Inc. averages $4,754 (1 cited inspection).
1 inspection on this page followed a fatal incident.
Wisconsin · latest 90 days of OSHA records
228employers cited
Get notified the morning OSHA posts each new citation in Wisconsin: the employer, the site address, the rules broken and the penalty.
See who gets cited nextLatest cited in Wisconsin
Checking a subcontractor, a client or your own company? Watch K. Kimmes Excavating, Inc. and get notified the morning OSHA posts a new citation for it.
Watch this company6327 Tower Avenue, Superior, WI 54880 · General Freight Trucking, Local · OSHA's record · Phone and website on Google Maps
No citations from this inspection.
6327 Tower Avenue, Superior, WI 54880 · General Freight Trucking, Local · OSHA's record · Phone and website on Google Maps
No citations from this inspection.
6327 Tower Avenue, Superior, WI 54880 · General Freight Trucking, Local · OSHA's record · Phone and website on Google Maps
Incident on Sep 8, 2020 (fatal): Employee is killed when run over by dump truck tires
At 9:15 a.m. on September 8, 2020, an employee was standing at the driver's side of a Kenworth dump truck, model T800, fleet # K-12, while a coworker and the excavation manager finished pre-trip brake adjustments. The coworker parked the dump truck outside the repair shop, with the truck in gear and the parking brake turned off, so he and the excavation manager could adjust the slack adjusters on each air brake. The coworker finished adjusting the slack adjusters and the excavation manager finished working on the truck's air compressor unit and they were preparing to start the truck in order to conduct a final test of the air braking system. The employee was standing near the driver's side tandem axle when the excavation manager opened the driver's side door and, while standing on the ground, started the truck. The coworker, also standing at the driver's side of the truck, yelled to the excavation manager too late that the truck was still in gear. The truck lunged forward when the key was turned and the employee was run over. The medical examiner pronounced the employee dead at the scene with cause of death being a fractured skull with additional injuries to the chest, torso, and leg.
| Citation and rule | Type | Proposed | Current | Issued | Status |
|---|---|---|---|---|---|
| Citation 1, item 1 29 CFR 1910.147(c)(1) · Lockout/tagout |
Serious | $4,096 | $4,096 | Feb 12, 2021 | Final |
| Citation 2, item 1 29 CFR 1903.19(c)(1) · Proving cited hazards were fixed |
Other-than-serious | $329 | $329 | Aug 20, 2021 | Final |
| Citation 2, item 2 29 CFR 1903.19(d)(1) · Proving cited hazards were fixed |
Other-than-serious | $329 | $329 | Aug 20, 2021 | Final |
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1903.19(c)(1)
(c) Abatement certification. (1) Within 10 calendar days after the abatement date, the employer must certify to OSHA (the Agency) that each cited violation has been abated, except as provided in paragraph (c)(2) of this section.
29 CFR 1903.19(d)(1)
(d) Abatement documentation. (1) The employer must submit to the Agency, along with the information on abatement certification required by paragraph (c)(3) of this section, documents demonstrating that abatement is complete for each willful or repeat violation and for any serious violation for which the Agency indicates in the citation that such abatement documentation is required.
29 CFR 1910.147(c)(1)
(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.
Alert subscribers get notified of each newly cited employer in Wisconsin the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.